Operation Manual

Basic Sewing Techniques

Tapering Stitch, model 30

The tapering stitch automatically tapers the satin stitch for

corners and points and can be used for satin stitch lettering.

1. Place the fabric in position under the presser foot.

2. Start sewing. The machine will sew the tapered point and

then continue with a satin stitch at the selected stitch width.

A reverse icon (D) is shown on the GraphicDisplay indicating

that you need to press the Reverse button to step to the next

part of the stitch. When the satin stitch is as long as desired,

press the Reverse button. This will start the tapering of the

end. When the tapering is completed the machine stops

automatically.

3. To repeat the stitch with the same size, press the STOP

button. Reposition your fabric, then step on the foot control

to sew again. The machine will stop automatically when the

stitch is completed.

Tip: For a narrower satin stitch, adjust the stitch width.

To begin with a Á at end satin stitch, press the Reverse button before

starting to sew.

1:30, 1:31 Tapering Stitches

Fabric: All types of fabric.

Select: The fabric you are using

and the Tapering stitch1:30 or

1:31, depending on what sort of

beginning and end you wish to have

on your stitch.

Use: Presser foot B as

recommended and the needle

recommended for your fabric.

More Sewing Techniques

Find instructions for many more sewing techniques on the HUSQVARNA VIKING® Internet

web site. Enter www.husqvarnaviking.com and go to Sewing, Sewing Room, Sewing Techniques.