User's Manual

English – 53

Assembly

Assemble as follows:

1. Lubricate and fit the pump piston (B), spring and washer.

Press in the unit and at the same time screw in the adjuster

screw (A) with the spring and washer.

OIL PUMP

Now assemble the following parts:

3. Cylinder and crankshaft. See the chapter "Crankshaft,

Piston and Cylinder".

4. Tank unit. See the chapter "Tank unit".

5. Ignition system and the spark plug. See the chapter

"Ignition system".

6. Starter. See the chapter "Starter".

7. Carburettor. See the chapter "Carburettor".

8. Muffler. See the chapter "Safety equipment".

9. Centrifugal clutch. See the chapter "Centrifugal clutch".

10. Bar and chain. See the Operator Guide.

11. Test run the chain saw and check the oil flow. See the

Operator Guide.

2. Fit the guide (C) and cover plate (D).