User's Manual

English – 43

TANK UNIT

Replacing the tank vent valve, oil tank

334T, 338XPT:

1. Pull out the valve’s rubber fastener using a pair of pliers.

2. Fit a new pin, vyon plug and valve in a new rubber fastener,

place the unit in the hole in the tank from the outside.

3. Pull in the valve with fitted vyon plug and pin using a pair of

long-nosed pliers from inside the tank.

1. Pull out the vyon plug (G) by pushing in a screwdriver and

prising it out. Then pull out the plastic valve.

2. Fit the plastic valve and vyon plug, using the shaft of a

screwdriver to press the vyon plug in place.