Riding Mower Operator's Manual

36
MAINTENANCE
Checking the Hydraulic System
Total System Capacity..................1.125 gal.
To check the hydraulic fluid level, locate the
hydraulic reservoir under the seat. Remove
cap and check level. Fill to 1/4” from top of
tank.
Checking Battery
The factory installed battery is “Low
Maintenance”. Add liquid only as needed.
NOTE: Keep top of battery clean and free of
corrosion by washing with a solution of
baking soda and water OR ammonia and
water. Rinse with clean water. Batteries with
heavy corrosion should be removed and
cleaned with solution. Battery cable should
be disconnected before using a “Fast
Charger”.
Hydraulic reservoir
BAM-21
If a leak is suspected, use a piece of
cardboard or wood, NOT your hands,
to check for leaks.
Escaping hydraulic oil under
pressure can have sufficient force to
penetrate the skin, causing serious
injury.
If injured by escaping fluid, see a
doctor at once. Serious infection or
reaction can develop if proper
medical treatment is not
administered immediately.
WARNING!
Battery
BAM-21
WARNING!
UNTRAINED/UNAUTHORIZED
persons should NEVER
attempt to service or recharge
the battery in this unit.
Battery electrolyte is an acidic
solution and should be
handled with care. If electrolyte
is splashed on any art of the
body, immediately flush the
exposed area with liberal
amounts of water and obtain
medical aid immediately.
DO NOT allow flames or sparks
near a battery when
connecting for jump starting or
charging.
Hydrogen gas is produced
during the charging process
and can be explosive. Provide
adequate ventilation to prevent
possible explosion.
WARNING!