Lawn Mower User Manual

OPERATION

Starting the Engine

1. Sit on the seat.

2. Raise the mower deck to the transport position by

setting the lift pedals fully forward.

3. Activate the parking brake.

4. Disengage the mower blades by pressing the

blade switch downwards.

8065-004

Press the control for disengaging the mower deck

8065-017

Set mower deck to the transport position

7. Push foot pedal fully forward for transport position.

Set pin at desired cutting height. (Height selection

pin is removed by rotating 180

.) Make sure that

the pin is inserted fully through the both sides of

the height panels.

The following conditions must be fulﬁlled before the

engine can be started:

• The blade switch for engaging the mower blades

must be depressed.

• The parking brake must be on.

• Both steering controls must be in the locked

(outer) neutral position.

8065-016

Set deck to selected cutting height