Product Manual
Table Of Contents
- DH2000 CORDLESS HEDGE TRIMMER (w/ battery and charger) DH2000W CORDLESS HEDGE TRIMMER (w/o battery and charger)
- Table of Contents
- Introduction
- Servicing Information
- Safety
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Disposal
- Specifications
- Warranty Statements
- Product Registration
- Notes
26 X7508170201
© 03/2016 ECHO Inc.
MAINTENANCE DH2000
1. Stop hedge trimmer (See “Stopping Cordless Electric
Hedge Clipper”).
2. Remove battery (See “Battery Removal”)
3. Remove blade guard. (see “Blade Guard Remove/Install
instructions”).
4. Slide blades to allow file clearance using slots (A) on bottom
of blade. Do not pry against cutting edges.
5. File each edge carefully. Follow the original shape of the
blade.
If a power grinder is used DO NOT allow blade to overheat.
6. Brush loose debris and file shavings from blades.
7. Install blade guard. (see “Blade Guard Remove/Install instructions”).
8. Lubricate blades (see “Lubrication”).
Adjustment
Hedge Trimmer blades are very sharp. Touching them may
lead to severe personal injury. Use long hex wrenches and
sockets with extensions when tightening blade screws and
blade lock nuts to keep hands at a safe distance from sharp
blades.
Check blade screw tightness periodically to maintain blade
adjustment.
1. Stop hedge trimmer (See “Stopping Cordless Electric Hedge Clipper”).
2. Remove battery (See “Battery Removal”)
Parts Required: none
45
o