Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Important
- Personal protective equipment
- Machine¢s safety equipment
- Cutting equipment
- Fitting the handlebar (323R)
- Fitting the handlebar (325Rx, 325RDx)
- Assembling and dismantling the two-piece shaft (325RDx)
- Assembling the cutting equipment
- Fitting a blade guard, grass blade and grass cutter
- Fitting the blade guard and saw blade
- Fitting a trimmer guard and Superauto II 1” trimmer head
- Fitting other guards and cutting attachments
- Adjusting the harness and clearing saw
- Standard harness
- Fuel safety
- Fuel
- Fuelling
- Check before starting
- Starting and stopping
- General working instructions
- Carburettor
- Muffler
- Cooling system
- Bevel gear
- Air filter
- Two-piece shaft (325RDx)
- Spark plug
- Maintenance schedule
- Technical data
- EC-declaration of conformity
English
–
5
WHA
T IS
WHA
T?
What is what on the c
learing saw?
1
Blade
2 Grease filler cap, bevel gear
3 Bevel gear
4 Cutting attachment guard
5 Shaft
6 Handlebar
7 Throttle control
8 Stop switch
9 Throttle lockout
10 Suspension ring
11 Cylinder cover
12 Starter handle
13 Fuel tank
14 Choke control
15 Air purge
16 Air filter cover
17 Handle adjustment
18 Locking nut
19 Support flange
20 Support cup
21 Drive disc
22 Trimmer head
23 Socket spanner
24 Operator
′
s manual
25 Transport guard
26 Allen key
27 Locking pin
28 Harness
29 Shaft coupling
30 Start throttle button
31 Part throttle dial (RX, RDX)
32 Adjusting the throttle wire
33 Spark plug cap and spark plug