Lawn Mower User Manual

English - 43
6. MENU FUNCTIONS
6.3 Timer (1)
The lawn should not be cut too often to obtain the best
mowing result. Consequently, it is important to limit the
operating time using the timer function if the working
area is less than the mower's working capacity. When
Automower
®
is allowed to mow too much, the lawn
may appear flattened. Besides, the mower is subjected
to unnecessary wear.
The timer function is also an ideal means to control
during which periods Automower
®
should not mow, for
example, when the children are playing in the garden.
The factory setting is 07:00 - 23:00 and it allows
mowing every day of the week. This is normally a
suitable setting for a 500 m
2
working area.
When setting the timer, calculate that the robot lawn
mower mows about 30 m
2
per hour and day.
• Work period 1
to set start and stop times for operating period 1.
Enter each required time in hours and minutes
and press OK to confirm the entered time.
• Work period 2
to set start and stop times for operating period 2.
Enter each required time in hours and minutes
and press OK to confirm the entered time.
• Work days
to select the days the mower must work.
Automower
®
will work during the days that are
ticked off.
• Reset timer
resets values to the factory settings.
To inactivate Work period 1 or Work period 2, enter the
time 00:00 - 00:00 to reset the timer to --:-- - --:--. .
A clock icon is displayed on the start page when the
timer settings are set. The clock icon is black when the
mower is not allowed to mow due to a timer setting and
it is white when the mower is allowed to cut.
The mower has an inbuilt rest period of at least 8 hours
a day. The mower is parked in the charging station
during this period. See 4.2 Using the timer on page 35.
Work period1
Work period2
Work days
Reset timer
Timer
Installation
Security
Settings