Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Important
- Personal protective equipment
- Machine¢s safety equipment
- Cutting equipment
- Assembling the handlebar and throttle (240R, 250R)
- Fitting the handlebar (240F, 252RX)
- Transport position, handlebar (240R, 240F, 250R, 252RX)
- Fitting the handlebar (265RX)
- Assembling the cutting equipment
- Fitting a blade guard, grass blade and grass cutter
- Fitting the blade guard and saw blade
- Fitting the trimmer guard and trimmer head Trimmy SII
- Fitting other guards and cutting attachments
- Adjusting the harness and clearing saw
- Standard harness
- Triobalance harness
- Fuel safety
- Fuel
- Fuelling
- Check before starting
- Starting and stopping
- General working instructions
- Carburettor
- Muffler
- Cooling system
- Air filter
- Bevel gear
- Spark plug
- Maintenance schedule
- Technical data
- EC-declaration of conformity (Applies to Europe only)
English – 35
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data 240R 240F
Engine
Cylinder displacement, cm
3
40,2 40,2
Cylinder bore, mm 40 40
Stroke, mm 32 32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 13500 13500
Speed of output shaft, rpm 9190 9190
Max. engine output, acc. to ISO 8893 1,8/9000 1,8/9000
Catalytic converter muffler No No
Speed-regulated ignition system No No
Ignition system
Manufacturer/type of ignition system EM/ET EM/ET
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q
Fuel tank capacity, litre 0,8 0,8
Weight
Weight without fuel, cutting attachment and guard, kg 8,6 8,4
Noise emissions
(see note 1)
Sound power level, measured dB(A) 114 114
Sound power level, guaranteed L
WA
dB(A) 114 116
Sound levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
100/104 98/101
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.: 2,1/2,1 3,2/3,0
At idle, left/right handles, max.: 2,4/2,8 3,8/4,1
At max. speed, left/right handles, min.: 2,9/2,4 1,9/2,4
At max. speed, left/right handles, max.: 4,0/3,5 4,2/4,7