Ride Mower Operator's Manual

SERVICE AND ADJUSTMENTS

• Disengage belt tension rod (K) from locking bracket

(L).

• Install belt onto engine clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower

pulley grooves.

• Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring

loaded. Have a tight grip on rod and

engage slowly.

• Raise attachment lift lever to highest position.

• If necessary, adjust gauge wheels before op erating

mower as shown in the Operation section of this

manual.

FIG. 21