Operators Manual
Table Of Contents
- Symbols
- Contents
- Note the following before starting:
- Dear Customer,
- Important
- Personal protective equipment
- Machine¢s safety equipment
- Cutting equipment
- Fitting the handlebar (232R)
- Fitting the handlebar (235R, 235FR)
- Transport position, handlebar
- Assembling the cutting equipment
- Fitting a blade guard, grass blade and grass cutter (232R)
- Fitting a blade guard, grass blade and grass cutter (235R, 235FR)
- Fitting the blade guard and saw blade (232R)
- Fitting the blade guard and saw blade (235R, 235FR)
- Fitting a trimmer guard and Superauto II 1” trimmer head (232R)
- Fitting the trimmer guard and trimmer head Trimmy SII (235R, 235FR)
- Fitting other guards and cutting attachments (232R)
- Fitting other guards and cutting attachments (235R, 235FR)
- Adjusting the harness and clearing saw
- Fuel safety
- Fuel
- Fuelling
- Check before starting
- Starting and stopping
- General working instructions
- Carburettor
- Muffler
- Cooling system
- Bevel gear
- Air filter
- Spark plug
- Maintenance schedule
- Technical data
- EC-declaration of conformity
ASSEMBLY
20 – English
Correct height
1 Forestry clearing
Adjust the support strap so that the support hook is
around 10 cm below your hip. The blade should be
angled forward a little.
2 Grass clearing
The support hook should hang around 20 cm below
your hip so that the blade is parallel to the ground.
Correct balance
1 Forestry clearing
Move the suspension ring on the machine forward or
backward. It is easier to avoid sawing into the ground
if the blade is balanced a few dm above the ground.
2 Grass clearing
Let the blade balance at a comfortable cutting height,
i.e. close to the ground.