Operators Manual

17
English
THROTTLE LOCKOUT
• Stop operation if the throttle lockout is defective.
• The throttle lockout is the device not to accelerate the
throttle lever without intention. While pushing the
throttle lockout, you can accelerate the throttle lever.
1. Check if the throttle lever does not move when you do
not push the throttle lockout.
2. Check if the throttle lever moves when you grasp or
release it while pushing the throttle lockout.
3. Check if the throttle lockout returns to its original
position when you release your hand from the throttle
lockout.
• If you find any defects at the checks above, contact your
nearest servicing dealer for repair.
REDUCTION GEARBOX
Refill gear housing every 50 working hours. Use
Husqvarna's special grease.
Use the grease pump. Feed grease until it comes out of
the base of the blades.
• Grease nipple : A type
ANTI-VIBRATION SYSTEM
A deformed or damaged anti-vibration system may
cause breakages like getting rickety or falling off of
engine and/or blade
• Check that the vibration damping elements are not
damaged.
MUFFLER
• Inspect periodically, the muffler for loose fasteners, any
damage or corrosion. If any sign of exhaust leakage
is found, stop using the machine and have it repaired
immediately.
• Note that failing to do so may result in the engine
catching fire.
Maintenance
(1)
(1) Throttle lockout
WARNING
H1153542-26,226HS75-99,GB.indd 17H1153542-26,226HS75-99,GB.indd 17 2010-11-08 17.152010-11-08 17.15