Instructions / Assembly

ManualsBrandsHusky ManualsGarden Center6 cu. ft. Steel Wheelbarrow with Flat Free Tire

THANK YOU

We appreciate the trust and condence you have placed in Husky through the purchase of this wheelbarrow. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Husky!

USE AND CARE GUIDE

6.0 CUBIC FOOT WHEELBARROW

Questions, problems, missing parts?

Before returning to the store, call

Husky Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

Item #1006 459 456

Model #HWB3016

Summary of content (10 pages)

PAGE 1
Item #1006 459 456 Model #HWB3016 USE AND CARE GUIDE 6.0 CUBIC FOOT WHEELBARROW Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this wheelbarrow. We strive to continually create quality products designed to enhance your home.
PAGE 2
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What is covered. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Pre-Installation PLANNING INSTALLATION Make sure all parts are present and correct. TOOLS REQUIRED 1/2 in. wrench and/or ratchet and deep socket Large slotted screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part Description AA 130 mm long M8 Bolts 2 BB 80 mm long M8 Bolts 2 CC 60 mm long M8 Bolts 4 DD 50 mm long M8 Bolts 2 EE 20 mm long M8 Bolts 6 FF Flat Washers 16 GG Locking Washers 16 HH M8 Nuts 16 BB CC DD EE Quantity FF GG HH 3 HUSKYTOOLS.
PAGE 4
Pre-Installation (continued) PACKAGE CONTENTS F G B A D C E H K I Part A B C D E F G H I J K Description J Quantity Tray Handles Wheel Risers / Wedges Tray Braces Leg Brace Legs Axle Right Axle Bracket Left Axle Bracket Front Wheel Guard Hardware Bag 1 2 1 2 2 1 2 1 1 1 1 1 4
PAGE 5
Assembly 1 Building Handles Rounded Gripping End NOTE: The open side of the “C” cutout in the top and bottom surfaces of the wedges should face each other when assembled. □ Orient the handles (B) level as shown. Taller End of Riser □ The holes in the handle (B) nearest the rounded gripping end should align with the narrow end of the riser/wedge (D). B D □ The next/second set of holes in the handle (B) should align with the taller end of the riser/wedge (D).
PAGE 6
Assembly (continued) 3 Assembling the Leg Brace G NOTE: Bolt heads go on one side. Flat washers, lock washers, and nuts go on the other - in that order. FF GG HH EE IMPORTANT: All hardware should be installed only finger tight until wheelbarrow is completely assembled. F □ Loosely assemble the legs (G) and leg brace (F) together as shown using four 20 mm bolts (EE) and the matching flat washers (FF), lock washers (GG) and nuts (HH).
PAGE 7
Assembly (continued) 5 Attaching the Front Wheel Guard □ Attach front wheel guard (K) to the wheel end of the handles (B) using the two 50 mm bolts (DD) as shown. Secure with the matching flat washers (FF), lock washers (GG) and nuts (HH). DD GG FF B HH DD K 6 Securing Tray Braces NOTE: These brackets are directional. Orient them so that the longer ends face the tray and the shorter ends face the wooden handles.
PAGE 8
Assembly (continued) 7 Attaching the Right Axle Bracket NOTE: Do not tighten yet. □ Loosely attach and secure the right axle bracket (I) to the handle (B) and tray brace (E) using two 60 mm bolts (CC). The tray brace attaches to the front bolt hole on top of the handle. Bolts go in from the top and are secured below the bracket with flat washers (FF), lock washers (GG) and nuts (HH).
PAGE 9
Assembly (continued) 9 Attaching the Left Axle Bracket □ Loosely attach and secure the left axle bracket (J) to the handle (B) and tray brace (E) using two 60 mm bolts (CC). The tray brace attaches to the front bolt hole on top of the handle. Bolts go in from the top and are secured below the bracket with flat washers (FF), lock washers (GG) and nuts (HH). HH GG FF J CC B 10 Tightening the Hardware □ Fully tighten all hardware prior to use. 9 HUSKYTOOLS.
PAGE 10
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.