Use and Care Manual

Never alter or repair a tool
•Never modify or attempt to repair a tool by welding, grinding, or any other
method. •Worn out or damaged tools should be discarded and replaced. The
only exception to this is tools that the manufacturer specifically states can be
resharpened; even then, resharpening should be done by experienced firm that
specializes in tool maintenance.
Be aware of other workers in your area
•Don’t count on others to look out for your safety. Be alert to co-workers using
hand tools or engaging in activities that might present a hazard to you; take
appropriate action to ensure you are protected from danger.
Maintain your tools
•Periodically check your tools for wear. Make it a habit to clean tools before
putting them away. Tools with moving parts should be lubricated on a regular
basis.
Use tools for their intended purpose only
•Tools are made to do specific jobs, but it is often more convenient to use the tool
you have with you for the task at hand. Don’t do it; get the right tool for the job.
•When working in areas made hazardous by the presence of flammable vapors
or dust, use only non-sparking tools made specifically for that purpose.
•When working near electrical circuits, make sure you are using tools protected
with high dielectric insulation specifically made for that purpose. Do not use tools
with standard cushion grips in such cases, as they offer no protection against
electrical shock
Never expose to excessive heat
•Excessive heat, such as that produced by a blowtorch or electric heating coils,
can make hand tools brittle or weak, creating a danger to the user. Avoid
exposing tools to flame or any extreme heat source.
General Safety Guidelines for measuring tools
Always wear safety approved eye protection
•As previously stated, eye protection is essential when using any type of hand
tool.
Control the retraction of measuring tapes
• The end hooks of tapes retracted too quickly may whip around violently,
possibly hitting the user.