Instructions / Assembly

ManualsBrandsHusky ManualsKitchen52 in. Pegboard Back Wall for Tool Cabinet, Black

Pre-assembly

TOOLS REQUIRED

Safety

goggles

HARDWARE INCLUDED

SPECIFICATIONS

Screw M6 x 12L

Self-drilling Screws 1/4 in. X 3/4 in. L

Maximum capacity 100 lbs

NOTE: Hardware not shown to actual size.

Part Description Quantity

Phillips

screwdriver

10 mm.

socket

1/8 in.

drill bit

Power

drill

Only needed for Assembly B

(Only needed for assembly B)

Only needed for Assembly B

Summary of content (6 pages)

PAGE 1
Pre-assembly Only needed for Assembly B TOOLS REQUIRED Safety goggles Phillips screwdriver Power drill HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Only needed for Assembly B AA Part AA BB Description Screw M6 x 12L Self-drilling Screws 1/4 in. X 3/4 in. L (Only needed for assembly B) BB Quantity 19 16 SPECIFICATIONS Maximum capacity 100 lbs 4 10 mm. socket 1/8 in.
PAGE 2
Pre-assembly (continued) PACKAGE CONTENTS B D C A Part Description Quantity A Bottom Pegboard Panel 1 B Top Pegboard Panel 1 C Right Support Post 1 D Left Support Post 1 5 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
PAGE 3
Assembly D ounting the pegboard back wall to the A. MHusky 52 in. 10-Dr Mobile Workbench Model#HOTC5210B1AD, SKU#1001-075-943 Model#75809AHR, SKU#1001-081-787 Model#HTBX105F, SKU#1001-257-215 B C WARNING: Use special care to not over-tighten any of the screws to avoid damage to the pegboard or mobile workbench. AA 1. Place the right support post (C) on the back side of the mobile workbench. Ensure the support post lines up with the four bottom holes and secure the post using the four M6 screws (AA).
PAGE 4
Assembly (continued) B. Mounting the pegboard back wall to the Husky 52 in. 11-Dr Mobile Workbench 5. Attach the right support post (C) to the back of the mobile workbench using eight self-drilling screws (BB) and a 10 mm socket. Secure the post, but do not tighten the screws at this time so that the support post has some movement. 6. Repeat step 5 to attach the left support post (D).
PAGE 5
Assembly (continued) 8. Attach the top pegboard panel (B) to the right support post (C) and left support post (D) using four M6 screws (AA). Secure the pegboard to the post, but do not tighten at this time. D 10. Carefully, tighten the sixteen self-drilling screws (BB) to secure the support posts (C) and (D) to the mobile workbench. Do not over-tighten the screws to avoid damage to the mobile workbench's wood top and steel corners. 11.
PAGE 6
Assembly (continued) Operation ounting the Pegboard Panels C. Mdirectly to a wall The peg holes will accommodate all standard size 1/8 in. and 1/4 in. peg hooks. NOTE: Hardware is not included to secure pegboard panels to a wall. 1. On a flat level surface, align the long sides of the top panel (B) and bottom panel (A) together and using a Phillips-head screwdriver, tighten the three M6 screws (AA) to connect the panels together. B AA A 2.