Use and Care Manual

ManualsBrandsHusky ManualsGarage Storage8 in. x 50 in. Slat Wall 2-Panel Pack with Trim

THANK YOU

We appreciate the trust and conﬁ dence you have placed in Husky through the purchase of this wall panel. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Husky!

USE AND CARE GUIDE

WALL PANEL 2-PACK

WALL PANEL STARTER PACK

2pcs.

8linear ft. (5 sq. ft. of wall space)

WALL PANEL 4-PACK

WALL PANEL VALUE PACK

4pcs.

9sq. ft. of wall space

Questions, problems, missing parts?

Before returning to the store, call

Husky Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

Item #1003011861

Model #80234HWPK

Item #1003011846

Model #80235HWSK

Item #1003011848

Model #80236HWPK

Item #1003011845

Model #80237HWVP

Summary of content (7 pages)

PAGE 1
Item #1003011861 Model #80234HWPK Item #1003011846 Model #80235HWSK Item #1003011848 Model #80236HWPK Item #1003011845 Model #80237HWVP USE AND CARE GUIDE WALL PANEL 2-PACK WALL PANEL STARTER PACK 2 |8 pcs. linear ft. (5 sq. ft. of wall space) WALL PANEL 4-PACK WALL PANEL VALUE PACK 4 |9 pcs. sq. ft. of wall space Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m.
PAGE 2
Pre-Installation (Wall Panel 2-Pack & Wall Panel Starter Pack) Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Husky Wall Configurations Installation - [For 2 Pack & 4 Pack] 2-PANEL CONFIGURTAIONS 1 Marking the height 1x1 1x1 48.43” 48.43” 4 Installing the top rail □□ Mark the desired height of the Husky Wall panel on your wall. □□ Place top rail (BB) just above the line (so you can see stud marks). Make sure it is level and install screws (FF), starting them into indented slots at each stud location. 9.06” BB 2x1 96.43” Note: make sure screw is flush otherwise Husky Wall panel will not fit properly.
PAGE 4
Installation - [For 2 Pack & 4 Pack] 7 9 Securing the bottom panel Installing the bottom rail pieces □□ Install bottom rail (AA) pieces by simply placing them in bottom panel (EE) (where screws are installed) and firmly pushing and locking them in. □□ Install screws (FF) in bottom panel (EE) again where indent is located and where you have marked the studs.
PAGE 5
NOTICE: Care and Cleaning PLEASE READ BEFORE INSTALLING OR RISK DAMAGING HUSKY WALL How do I maintain and clean my new organizing system? To counter sink use: 3/8” drill bit. To bore use: drill bit. If there is a gap between two top rails end to end or bottom rails end to end because of the dowel / e-clip you can counter sink the hole 1/8” with a 3/8” drill bit. Also if you are having trouble getting the dowels in any of the dowel holes you can bore out any of the dowel holes with a 3/16” drill bit.
PAGE 6
Notes Notes 10 11 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
PAGE 7
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.