Use and Care Manual

216

Manage your Control Head

Start the Timer

. Main Menu: Press the MENU key twice. Select the Alarms tab.

2. Select Timer Setup. Press the RIGHT Cursor key.

3. Use the Cursor Control key to set the hours, minutes, and seconds.

4. To start the Timer immediately, select Start. Press the RIGHT Cursor key.

To save your settings and start the Timer at a later time, select Save. Press the RIGHT Cursor key.

NOTE: The Timer can be displayed as a digital readout. See Views: Display Digital Readouts.

Change the Display Language

The available languages are determined by your Humminbird model.

WARNING! Do NOT enable Asian Mode if you do not require Asian languages. Before you select Asian Mode, contact Customer

Service for important information.

1. Main Menu: Press the MENU key twice. Select the Setup tab.

2. Select Language.

3. Press the RIGHT or LEFT Cursor keys to select a language.

Change Digital Readout Formats

Use the following instructions to customize the format for the digital readouts displayed on the control head. See Views: Display

Digital Readouts for more information.

Change the Digits Format

If you have Digital Readouts set to Boxes, you can change how the numbers are displayed.

1. Main Menu (Advanced User Mode): Press the MENU key twice. Select the Setup tab.

2. Select Digits Format.

3. Press the RIGHT or LEFT Cursor keys to select a format.

Change Units of Measurement

1. Main Menu: Press the MENU key twice. Select the Setup tab.

2. Select Units - Depth, Units - Distance, Units - Speed, etc., and select each unit setting as you prefer.

3. Close: Press the EXIT key.

NOTE: The Units - Temp menu is only available in an international model.