(844) 509-4888 www.humblecrew.
PAGE: 1 ASSEMBLY INSTRUCTIONS PAGE: 1/4 MODEL : DAWN-BOOKCASE BC8616 Before youbegin, begin, please follow instructions carefully, then follow them step by step. Before please make sure all included. carefully. Before you you begin, please make sureassembly all parts parts are are included. Read Read instructions instructions carefully. IfRead is call our customer service number (844-509-4888) help. We can ship aa replacement part free of instruction carefully .
PAGE: 2 ASSEMBLY INSTRUCTIONS BC8616 MODEL : STEP 1 STEP 2 - Insert hardware A1 onto panel (5). (Repeat 2 times.) - Insert hardware A2 onto panel (1). (Repeat 6 times.) - Insert hardware B onto panel (5). (Repeat 4 times.) - Insert hardware A1 onto panel (3) and (4) . (Repeat 4 times.) - Insert hardware B onto panel (3) and (4). (Repeat 8 times.
PAGE: 3 ASSEMBLY INSTRUCTIONS MODEL : STEP 3 STEP 4 - Attach panel (1) to panel (3), (4) and (5) . - Insert all hardware A2 into A1. - Rotate all A1 until tight. - Apply A3 onto all A1. (Repeat 6 times.) BC8616 Connect panel (2) to panel (3), (4) and (5) by using hardware C and D. (Repeat 6 times.) 1 C 4 5 ROTATE x6 D 3 A1 x6 1 Section View 4 A2 5 3 ROTATE A3 x6 2 PRESS HARDWARE D * In this step hardware A1, A2 and B are pre-inserted.
PAGE: 4 ASSEMBLY INSTRUCTIONS MODEL : STEP 5 STEP 6 Fix hardware G into panel (2) by using hardware E. (Repeat 5 times for each hardware.) E G BC8616 Assemble part 8 into hardware G. (Repeat 4 times.) 8 x20 ROTATE G 1 x4 ROTATE 1 4 4 5 5 3 2 2 SCREWDRIVER REQUIRED (844) 509-4888 www.humblecrew.
PAGE: 5 ASSEMBLY INSTRUCTIONS MODEL : STEP 7 BC8616 STEP 8 Insert hardware F into mounting positions on panel (3), (4) and (5) by hand. (Repeat 16 times.) Assemble panel (7) to entire body with hardware H. (Repeat 25 times.) H HIT 1 x25 7 1 8 3 F 7 x16 5 4 PRESS 3 2 2 8 8 8 8 HAMMER REQUIRED (844) 509-4888 www.humblecrew.
PAGE: 6 ASSEMBLY INSTRUCTIONS MODEL : STEP 9 STEP 10 Assemble panel (6) into between panel (3), (4) and (5). (Repeat 4 times.) Assemble hardware I1 into panel (1) and (7) by using hardware I2. (Repeat 2 times.) 1 BC8616 1 3 ROTATE 6 7 4 5 6 6 4 2 8 8 8 x2 I2 7 6 I1 8 8 8 8 8 SCREWDRIVER REQUIRED * In this step hardware F are pre-inserted. (844) 509-4888 www.humblecrew.
PAGE: 7 ASSEMBLY INSTRUCTIONS BC8616 MODEL : STEP 11 HAMMER REQUIRED - Mark and use the power drill to drill a hole on the wall. - Hit hardware I3 into the wall. (Repeat 2 times.) OR POWER DRILL REQUIRED STEP 12 - Assemble hardware I1 to I3 by using hardware I4 . (Repeat 2 times.) I4 I3 SCREWDRIVER REQUIRED ROTATE 1 1 I3 6 3 6 HIT 5 6 6 x2 3 4 2 8 8 8 5 6 6 6 6 4 2 8 8 (844) 509-4888 www.humblecrew.
PAGE: 8 ASSEMBLY INSTRUCTIONS STEP 13 - Connect both of the hardware I1 by using hardware I5 . - Tighten the hardware I5. (Repeat 2 times.) I1 I1 1 6 3 BC8616 MODEL : CONNECT I5 x2 I5 6 x2 5 6 6 4 TIGHTEN 2 8 I1 8 8 8 (844) 509-4888 www.humblecrew.