User's Manual

3.3 Service Searching

If your receiver is connected to the aerial and television, you can automatically or manually search

services.

1. Press the MENU

button

2. Select Installation using the

button and press the

button.

3. Select Service Searching using the

button and

press the OK

button.

4. Enter a PIN code. The default PIN code is 0000.

5. Select Automatic Search or Custom Search using the

button and press the OK button

1. Automatic Search

If your receiver is connected to the aerial and television, you can automatically search services

without entering any other information.

1. Select Start Service or End Service using the

button.

2. Press the

or NUMERICAL (0~9) button to input the

start or end service number

3. Press the OK

button to start the search.

2. Custom Search

You can search services manually by searching parameters, if you know the service information.

Select Channel, Frequency, Mode, Guard Interval or Network

Search using the

button and press the button.

3. Setup

GB 16