User's Manual

9. Software Update
65
② Automatically search for new software.
③ When detecting update software, the following result is
displayed. If new software is not found by Automatic,
use Manual Update.
④ Select "Yes" and press the <OK> button to start
updating. Select "
No" and press the <OK> button to
return to the previous menu without updating.
⑤ When completing the software update, the product is
automatically powered off and on again.
[ Note]
Software Update S ites of HUMAX are listed in the following table.
Satellite Transponder data
Astra1 12669 (V) 22000 5/6
Sirius 12054 (V) 27500 3/4
Hispasat 11811 (H) 27500 3/4
Nilesat 11765 (H) 27500 3/4
Hotbird 11623 (V) 27500 3/4
Among the S oftware Update S ites of HUMAX, the software search operation is performed
only for the
satellites that have been set to Enable in Installation - Antenna S etting- Satellite
Alternative menu and that have all other Antenna Setting correct.
Manual Update
You can perform Manual Update only if you know which satellite has new software and the
Transponder information correctly.