Use and Care Manual

HUD -1 EZ BUILDING CARE AND MAINTAINENCE
 We recommend the structure be stained with a weatherproof
type product after installation for best color results.
 We recommend assembly and construction begin as soon as the
package is opened. The building MUST be placed on a level and
square solid foundation.
 We recommend to not leave material laying out over an extended
amount of time – especially in direct sunlight – as this may cause
warping and/or damage – especially to smaller component pieces
such as trim boards, hardware, etc…
 We recommend to place a roof covering as soon as the structure
is completed to avoid damages and leaks of the interior floor
boards.
 We recommend the use of a rubber or wood mallet only during
construction of the structure. A hammer should only be used with
the blocks provided to set the wall, window, and door selections.
 Only place nail and screws in recommended areas as outlined in
the instruction manual.
 Adjust all windows and doors by turning the exterior hinges
clockwise or counter-clockwise until alignment is made.
 Do not modify any piece of the structure unless it is noted in the
instructions it is Ok to do so.
 For additional assistance or questions, please contact us at
[e-mail] or at 731-574-8702.