Brochure

Data sheet
RADOX
®
125 (S05Z/S07Z-K)
Application
For internal wiring in electrical equipment, heating appliances, sensors, switchboards and
control panels or distribution boxes in automation, espacially suitable for the connection of
motors windings, magnets and transfomers. Used for protected and fixed laying in tubes,
surface cabling, direct in plaster or underneath it, as well in cable conduits.
Data
Technical Data
Voltage rating U
o
/U 0.25 - 0.75mm
2
300/500 V AC
Voltage rating U
o
/U 1 - 300mm
2
600/1000 V AC
Temperature range (fixed installed) −55 up to +145°C
Conformity
Vertical flame spread 50 < L ≤ 540 mm EN 60332- 1- 2
Vertical flame spread, bunched
(applies for 1- 300 mm
2
)
L ≤ 2.5 m EN 60332- 3- 22
Smoke density T ≥ 60 % EN 61034- 2
Corrosivity of combustion gases pH ≥ 4.3, C ≤ 10 uS/mm EN 60754- 2
Amount of halogen acidgas HCl + HBr ≤ 0.5 % EN 60754- 1
Content of flourine HF ≤ 0.1 % EN 60684- 2, 45.2
Approvals
DNV (Det Norske veritas) pending
CPR (Construction Product regulation) Class E
CA
(class B
CA
pending)
Programm
Cross
section
Conductor
construction
Core Weight Bending radius
mm2 n x mm dia. dia. mm Kg/100m min.
0.25 19 × 0.13 1.3 ± 0.10 0.4 3x dia.
0.34 19 × 0.16 1.5 ± 0.10 0.6 3x dia.
0.5 19 × 0.18 2.0 ± 0.10 0.9 3x dia.
0.75 24 × 0.20 2.25 ± 0.10 1.2 3x dia.
1 32 × 0.20 2.60 ± 0.10 1.6 3x dia.
1.5 30 × 0.25 2.85 ± 0.10 2.1 3x dia.
2.5 48 × 0.25 3.35 ± 0.10
3.0
3x dia.
4 56 × 0.30 3.95 ± 0.10 4.6 3x dia.
6 82 × 0.30 4.65 ± 0.15 6.5 3x dia.
10 78 × 0.40 5.6 ± 0.15 10.6 3x dia.
16 119 × 0.40 6.75 ± 0.15 15.6 3x dia.
25 182 × 0.40 8.5 ± 0.2 24.2 3x dia.
35 266 × 0.40 9.7 ± 0.20 34.3 3x dia.
50 378 × 0.40 11.4 ± 0.20 48.3 3x dia.
70 348 × 0.50 13.8 ± 0.25 66.2 4x dia.
95 456 × 0.50 15.3 ± 0.25 85.3 4x dia.
120 570 × 0.50 17.2 ± 0.30 108.3 4x dia.
150 722 × 0.50 19.1 ± 0.30 135.3 4x dia.
185 874 × 0.50 21.3 ± 0.30 166.8 4x dia.
240 1147 × 0.50 24.5 ± 0.30 216.3 4x dia.
300 1443 x 0.50 27.1 ± 0.40 269.2 4x dia.
Various colours on request.
HUBER+SUHNER is certified according to ISO 9001, ISO 14001, ISO/TS 16949 und IRIS
Waiver
It is exclusively in written agreements that we provide our customers with warrants and representations as to the technical specifications and/or the fitness for any particular purpose. The facts and figures contained herein are carefully
compiled to the best of our knowledge, but they are intended for general informational purposes only.