User manual
Table Of Contents
- Contents
- Getting started
- Wearing the watch
- Adjusting and Replacing the watch strap
- Pairing your watch with your phone
- Powering on/off and restarting the watch
- Charging your watch
- Buttons and gestures
- Customizing the Down button
- Adjusting screen brightness
- Setting the vibration strength
- Setting time and language
- Enabling frequently used features
- Unlocking your phone using your watch
- Enabling Do not disturb mode
- Connecting earbuds
- Viewing the Bluetooth name and MAC address
- Check the watch's version
- Check the watch's SN
- Updating the watch
- Restoring the watch to its factory settings
- App management
- Getting notifications and deleting messages
- Setting favorite contacts (using a watch to make/receive a call)
- Answering or rejecting incoming calls
- Checking your call log
- Playing music
- Using Stopwatch or Timer
- Setting an alarm
- Using Flashlight
- Using the Barometer app
- Using Compass
- Weather reports
- Finding your phone using your watch
- Professional workouts
- Fitness and health
- Watch faces
Charging your watch
Charging
1 Connect the USB Type-C port and power adapter and then plug in the power adapter.
2 Rest your watch on top of the charging cradle, ensuring that the contacts on your watch
and the cradle are aligned. Wait until the charging icon appears on your watch screen.
3 When your watch is fully charged, 100% will be displayed on the watch screen and the
charging will stop automatically. If the battery level is below 100% and the charger is still
connected to the watch, the charging will start automatically.
• Use the dedicated charging cable, charging cradle, rated output voltage of 5 V, and
rated output current of 1 A or higher to charge your watch.
• It is recommended that you lift the charging cradle to attach it to your watch. Ensure
that the side of your watch with buttons is aligned with the charging port of the cradle.
After the cradle and watch are connected properly, check to see if the charging icon is
displayed. If you cannot see the charging icon, you may need to slightly adjust the
position of the cradle until contact is established and the charging icon appears.
• Your watch will automatically power o when its battery level is too low. After it is
charged for a while, your watch will automatically power on.
Charging time
Your watch will be fully charged within two hours. When the charging indicator displays
100%, the watch is fully charged. Disconnect your watch from the power adapter once it is
fully charged.
Getting started
8