Quick Start Guide

14
provider for details.)
When you are in range and Wi-Fi is on, you will automatically reconnect to available
networks that you have connected to previously.
When you are connected to a network, you can touch its name in the
Wi-Fi networks
list for details about the speed, security, address, and related settings.
If "The network password you typed is not correct, please try again" or "unable to connect to
the network" is displayed after you enter a password and connect the Tablet to a network,
check whether the encryption method, password type, password, and certificate are correct.
When the encryption mode is set to WEP, if "Obtaining address..." is displayed after you enter
a password and connect the Tablet to a network, check whether the password is correct. For
a solution, please touch its name in the
Wi-Fi networks list, touch Forget , enter the correct
WEP password and try again.
11.1.4 Adding a Wi-Fi Network
When a Wi-Fi network with any security credentials does not broadcast its name (SSID), or it
is not in range, you can add and connect to it when Wi-Fi is on. You need to contact the
service provider for details about the security scheme that is deployed on it and to obtain the
password or other required security credentials. The name (SSID) and credentials are saved
and you are automatically connected to this network if it is in range and Wi-Fi is on.
When Wi-Fi is on, do as the following steps to add a Wi-Fi Network.
1. In the Wi-Fi settings list, flick down and touch Add Wi-Fi network.
2. Enter the name (SSID) of the network in the Network SSID text field. If the network is
secured, touch the Security: button and then touch to select the security scheme in
the menu that opens.
3. Enter any required security credentials.
4. Touch Save.