Installation guide

Configuration Files

l SwitchA

sysname SwitchA

vlan batch 1

vlan 1

description admin_VLAN

interface Vlanif1

ip address 10.10.10.10 255.255.255.0

interface GigabitEthernet0/0/1

port link-type trunk

port trunk allow-pass vlan 1

aaa

local-user huawei password simple huawei

local-user huawei service-type telnet

local-user huawei privilege level 15

authentication-scheme default

authorization-scheme default

accounting-scheme default

domain default

user-interface con 0

user-interface vty 0 4

authentication-mode aaa

return

5.3 Logging In to the Web System Client

Before configuring the switch, you must log in to the Web system client.

Context

l Before logging in to the Web system client, ensure that the switch has been commissioned

and the Web system server is enabled on the switch.

l The Web system client connects to the switch through HTTP; therefore, you must log in

to the Web system client through HTTP.

l It is recommended that the Web system client should run the Windows XP operating system

because other operating systems may be imcompatible with the web system.And the Web

system client supports the Microsoft Internet Explorer 6.0 (IE6) and Firefox 3.0, or later

versions. The Web system client described in this document uses the IE6.

Procedure

Step 1 Open Microsoft Internet Explorer 6.0 on the client.

Step 2 Enter the universal resource locator (URL) of the Web system client in the address bar and press

Enter. The User Login dialog box is displayed, as shown in Figure 5-6.

The URL is in the format http://IP/view/login.html, for example, http://10.164.19.131/view/

S3700&S5700&S6700 Series Ethernet Switches

Quick Start 5 Logging in to the Device

Issue 02 (2012-09-10) Huawei Proprietary and Confidential