User's Manual

1
1 Installing the UIM Card and the Battery
Install your User Identity Module (UIM) card before using your phone.
Remove the UIM card and the battery only after powering off the phone.
When installing the UIM card, ensure that the gold contact area on the UIM
card faces down, and that the beveled edge of the UIM card aligns with that
of the UIM card slot.
2 Charging the Battery
1.
Connect the charger to the phone's charger jack.
2.
Plug the charger into a power outlet.
3.
Wait until the battery is fully charged.
While the battery is charging, the charging icon blinks. When the
charging icon stops blinking, the battery is fully charged.
4.
Unplug the charger from the power outlet and from the phone.