Product Data Sheet / Brochure

QuickSpecs
HPE ProLiant ML350 Gen10 Server
Standard Features
Page 13
Power Supply
• HPE 500W Standard Non-Hot-Plug Power Supply Kit
Notes:
− Non Redundant Power Supply
− Available in 92% efficiency and supported in pre-configured models only. This power supply is available in one of
the pre-built system SKUs. Customers can still choose to upgrade to HPE Flex Slot RPS later by installing the
ML350 Gen10 RPS enablement kit (874571-B21).
− Starting from March 1, 2020, this power supply and the pre-configured server model that carries it inside is
− Orderable in EMEA region due to the new ErP Lot 9 requirement. Please visit:
https://www.hpe.com/us/en/about/environment/msds-specs-more.html for more information.
• HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available in 94% efficiency.
• HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes:
− Available in 94% and 96% efficiency.
− Also available in -48VDC and 227VAC/380VDC power inputs.
• HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available in 94% efficiency.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and
offer multiple output power options, allowing users to "right-size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a country-specific AC power cord in Tower models; while in the Rack model, a standard 6-foot
IEC C-13/C-14 jumper cord (416151-B21) is included. If a different power cord is required, please check the ProLiant Power
Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit
HPE Server power supplies
.
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured
configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Class
2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
Notes: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more
information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot and Secure Start enable for enhanced security
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
• PXE boot support for IPv6 networks
• Workload Profiles for simple performance optimization