Product Data Sheet / Brochure

QuickSpecs
HPE ProLiant DL380 Gen10 Server
Standard Features
Page
11
On System Management Chipset
HPE iLO 5 ASIC
NOTE: Read and learn more in the iLO QuickSpecs.
Memory
One of the following depending on model
• Type:
− HPE DDR4 SmartMemory,
Registered (RDIMM), Load Reduced (LRDIMM)
• DIMM Slots Available
− 24
12 DIMM slots per processor, 6 channels per processor, 2 DIMMs per channel
• Maximum capacity (LRDIMM)
− 3.0 TB
24 x 128 GB LRDIMM @ 2933 MT/s
• Maximum capacity (RDIMM)
− 1.54 TB
24 x 64 GB RDIMM @ 2933 MT/s
• Maximum capacity (HPE Persistent Memory)
− 6.0 TB
12 X 512 GB Memory Modules @ 2666 MT/s
• Maximum capacity (NVDIMM)
− 192 GB
12 x 16 GB NVDIMM @ 2666 MT/s
NOTE: HPE Persistent Memory featuring Intel® Optane™ DC persistent memory only supported with select 2nd generation Intel
Xeon Scalable Series Processors ONLY ((82xx/62xx/52xx/4215) and can only be mixed with either RDIMMs or LRDIMMs.
NOTE: NVDIMMs are only supported on 1st generation Intel Xeon Scalable Series Processors and can only be mixed with RDIMMs.
NOTE: Maximum memory per socket is dependent on processor selection. 2
nd
generation processors supporting 2 TB or 4.5 TB
per CPU are indicated by the “M” and “L” in the processor model names (i.e. 8276M and 8276L). 1
st
gener
ation processors
supporting 1.5 TB per CPU are indicated by the “M” in the processor model names (ie 8160M)
NOTE:
Maximum memory per socket is dependent on processor selection. Processors supporting 1.5 TB per CPU is indicated by
the “M” in the processor model names (i.e. 8160M).
NOTE: Mixing of RDIMM and LRDIMM memory is not supported.
NOTE: For General Server Memory and NVDIMM Population Rules and Guidelines for Gen10 see details here:
http://www.hpe.com/docs/memory-population-rules
NOTE: For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/memory-speed-table
NOTE: To realize the performance memory capabilities listed in this document, HPE DDR4 SmartMemory is required.
For additional information, please see the
HPE DDR4 SmartMemory QuickSpecs
.
Memory Protection
For details on the HPE Server Memory Options RAS feature, visit: http://www.hpe.com/docs/memory-ras-feature
.
Expansion Slots
Primary Riser
Slots #
Technology
Bus Width
Connector Width
Slot Form Factor
Notes
1
PCIe 3.0
X8
X8
Full-height, full-length slot
Proc 1
2
PCIe 3.0
X16
X16
Full-height, full-length slot
Proc 1
3
PCIe 3.0
X8
X8
Full-height, half-length slot
Proc 1
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: The specifications above correspond with the default primary riser which also supports dual m.2 cards. Additional
Primary Riser options and specifications noted in the “Riser Information” table within this document.