Product Data Sheet / Brochure

QuickSpecs
HPE ProLiant ML350 Gen10 Server
Core
Options
Page 47
HPE NVIDIA Quadro RTX4000 GPU Module
R1F95A
NOTE: HPE ML350 Gen10 GPU External Power Cable Kit (877628-B21) is required.
NOTE:
HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
NOTE:
This GPU model is supported with the 2
nd
generation of Intel Xeon
®
Scalable Processors only.
HPE NVIDIA Tesla T4 16GB Computational Accelerator
R0W29A
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
NOTE:
This GPU model is supported with the 2
nd
generation of Intel Xeon® Scalable Processors only. It was
tested with the 1st generation of Intel Xeon® Scalable Processors also but support is limited to LVO and
private only.
Graphics Cable Kits
HPE ML350 Gen10 GPU External Power Cable Kit
877628-B21
NOTE: This kit consists of two external power cables to feed power to GPU modules with TDP larger than 75W
that is, this GPU external power cable kit is required except for HPE NVIDIA Quadro P2000 (Q0V77A) or the
new NVIDIA Tesla T4 (R0W29A). The longer GPU power cable is intended to support GPU installation in PCIe
slot 1 or 3 (slots coming from CPU 1); while the other shorter cable to support slot 5 or 7 (slots coming from
CPU 2).
PCIe Accelerators
HPE 750GB PCIe x4 Lanes Write Intensive HHHL 3yr Wty Digitally Signed Firmware Card
878038-B21
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit with 4 Fan Modules (874572-B21) is required.
HPE Cooling Options
HPE ML350 Gen10 Redundant Fan Cage Kit with 4 Fan Modules
874572-B21
NOTE: This kit is required for elevated Ambient temperature environments.
NOTE:
Add add’l 4x hot-plug fans which are installed in the fan cage to get N+1 fan redundancy and advanced cooling.
NOTE:
The performance 2P BTO models and the Rack CTO model will already include this kit to include 6 fans total.
NOTE:
The ML350 Gen10 Redundant Fan Kit (874572-
B21) is required for one of the following configurations or situations: 2P
configuration.
When the
unit is configured to use in Rack mode.
When front storage is fully populated with (3) 4LFF or (3) 8SFF drive cages or (2) LFF or SFF drive cages along with (2) media
bays and (1) DVD.
When ML350 Gen10 is used in ASHRAE 3 or 4 environment.
When the unit is configured with higher RPM SAS HDDs (10K, 15K or higher).
When the unit is configured with NVMe Express Bay for NVMe SSD support.
When M.2 is selected.
The ML350 Gen10 Redundant Fan Cage Kit is also needed to support certain higher end PCIe expansion cards for example, GPU
(Graphic Processing Unit), advanced PCIe accelerators, InfiniBand cards, higher
-
end network adapters and storage controllers
P816i
-a and P824i-pcontroller.
NOTE:
Please refer to the User Guide for special configuration
scenarios where the redundant fan option is required but does not
provide redundancy function.