ProLiant ML110 Gen10 Server

QuickSpecs
HPE ProLiant ML110 Gen10 Server
Core Options
Page 23
Recommended Options
Offering the best combination of performance, value and availability, Recommended Options have been selected by HPE experts
to provide the right technology for a range of workloads and market segments. Fully integrated into the HPE management and
security experience, Recommended Options provide the best fit with timely availability.
Extended Options
Extended Options provide an extended catalog of products tailored for customers in specific markets or with specific workloads,
requiring the utmost in performance or value. Fully integrated into the HPE management and security experience, Extended
Options represent great value and performance but typically have a longer lead-time.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
information. Note the Cabling Matrix can help to explain the cable routing for each option:
HPE Unique Options - Recommended
HPE ML110 Gen10 4LFF Drive Backplane Cage Kit (Recommended)
869491-B21
NOTE: The 4 LFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same
installation procedure.
HPE ML110 Gen10 4LFF Non Hot Plug Drive Cage Kit (Recommended)
874008-B21
NOTE: The 4 LFF Non hot-plug drive cage can be installed in both box 1 and box 2. Follow the same
installation procedure.
HPE ML110 Gen10 8SFF Drive Backplane Cage Kit (Recommended)
874007-B21
NOTE: The 8SFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation
procedure.
HPE ML110 Gen10 Redundant Power Supply Enablement Kit (Recommended)
867875-B21
NOTE: This kit is also required to support an optional redundant fan kit.
HPE ML110 Gen10 Redundant Fan with 4 Fans Kit (Recommended)
869489-B21
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W
Redundant Power Supply to be installed.
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM.
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This condition is
indicated by a flashing amber Health LED.
4. When the system requirements are to meet the A3 extended operating environment.
HPE ML110 Gen10 550W ATX Power Supply Kit (Recommended)
874009-B21
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your
server configuration. The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor
HPE Unique Options - Extended
HPE ML110 Gen10 Serial Port Kit (Extended)
874010-B21
Memory Selection
To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability,
HPE recommends memory from the list located here: http://www.hpe.com/servers/servermemoryconfigurator.
Best product availability is limited to US, Canada, and Latin America at this time.
HPE DDR4 SmartMemory
SmartMemory – Recommended
HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
(Recommended)
815097-B21