Software Owner manual

If the host timeout period is set to 11 seconds or longer, limit the total amount of data to:
◦ 3 GB or less for open systems
◦ 3,000 cylinders or less for mainframe systems
Launching Cache Residency
1. Log on to the primary SVP.
2. On the menu bar of the Remote Web Console main window, click Actions > Other function
> Cache Residency.
3. In the Cache Residency window, change from View to Modify mode.
Viewing Cache Residency information
The Cache Residency information can be viewed in the following fields in the Cache Residency
window:
• CU:LDEV tree
• LDEV information table
• Cache information area
Placing specific data into Cache Residency cache
This procedure places specific data from one or more LDEVs into Cache Residency cache.
1. In the Cache Residency window, select the desired CLPR from the CLPR: list.
2. In the CU:LDEV tree, select the LDKC and the CU containing the desired LDEV, and then select
the desired LDEV.
The LDEV information table shows the information for the selected LDEV. A dash (-) in the Mode
column indicates an area not already allocated to Cache Residency cache.
Launching Cache Residency 77