Software Manual

Table 32 Operations Displayed in the History Window (continued)
DescriptionsDisplays
Creation of the data volume pair was finished.Paircreate Complete
Restoring the data volume pair was started.Pairresync Start
Restoring the data volume pair was finished.Pairresync Complete
Splitting (suspending) the data volume pair was started.Pairsplit-r Start
Splitting (suspending) the data volume pair was finished.Pairsplit-r Complete
The data volume pair was split (suspended) because of a
failure.
Pairsplit-r (Failure)
Releasing the data volume pair was started.Pairsplit-S Start
Releasing the data volume pair was finished.Pairsplit-S Complete
The status of the data volume pair was changed from SMPL
to COPY because of an operation from the primary storage
system.
Status Change by MCU (SMPL to COPY)
The status of the data volume pair was changed from SMPL
to PAIR because of an operation from the primary storage
system.
Status Change by MCU (SMPL to PAIR)
The status of the data volume pair was changed from COPY
to PAIR because of an operation from the primary storage
system.
Status Change by MCU (COPY to PAIR)
The status of the data volume pair was changed from COPY
to PSUS or PSUE because of an operation from the primary
storage system.
Status Change by MCU (COPY to PSUS/PSUE)
The status of the data volume pair was changed from PAIR
to PSUS or PSUE because of an operation from the primary
storage system.
Status Change by MCU (PAIR to PSUS/PSUE)
The status of the data volume pair was changed from PAIR
to SMPL because of an operation from the primary storage
system.
Status Change by MCU (PAIR to SMPL)
The status of the data volume pair was changed from COPY
to SMPL because of an operation from the primary storage
system.
Status Change by MCU (COPY to SMPL)
The status of the data volume pair was changed from PSUS
or PSUE to SMPL because of an operation from the primary
storage system.
Status Change by MCU(PSUS/PSUE to SMPL)
The status of the data volume pair was changed from PSUS
or PSUE to COPY because of an operation from the primary
storage system.
Status Change by MCU(PSUS/PSUE to COPY)
The status of the data volume pair was changed from PAIR
to COPY because of an operation from the primary storage
system.
Status Change by MCU(PAIR to COPY)
The status of the data volume pair was changed because
an operation for splitting a pair started at the secondary
storage system.
Status Change by RCU (Pairsplit-r Start)
The status of the data volume pair was changed because
an operation for splitting a pair finished at the secondary
storage system.
Status Change by RCU (Pairsplit-r Complete
An operation for releasing a pair has been started at the
secondary storage system. The status of the data volume
pair will change from PSUS or PSUE to SMPL.
Status Change by RCU (PSUS/PSUE to SMPL; Pairsplit-S
Start)
History Window 139