HP V5061u / V5061Au Digital Camcorder User Manual
Contents Preface..................................................................... 5 About this Manual................................................... 5 Copyright................................................................. 5 Declaration of Conformity...................................... 6 Trademark Recognition.......................................... 6 Safety and Handling Precautions.......................... 6 Camcorder & Battery Recycle Notice...................
4 2 CD Display Information...................24 BL 3.1 21 ideo Mode .................................................. 24 BV 3.2 3.3 Photo Mode................................................. 26 2 udio Mode.................................................. 28 BA 3 sing the Camcorder ........................29 BU 4.1 BV 24 ideo Recording.......................................... 29 4.2 Shooting / Playback Photos ....................... 32 4.2.1 4BTaking a Picture ...................................
6.2 BM 3 enu Options in Video Playback Mode..... 53 6.2.1 5BDelete .................................................. 53 6.2.2 56BProtect ................................................. 54 6.2.3 56BDate Ranking....................................... 56 6.3 BM 34 enu Options in Photo Mode..................... 57 6.3.1 57BPhoto Resolution ................................. 57 6.3.2 58BWhite Balance ..................................... 58 6.3.3 59BApply Artistic Effects ............................ 59 6.3.
6.5.8 6.5.9 6.5.10 6.5.11 6.5.12 6.5.13 6.5.14 7 78BLanguage............................................. 79 7 ormat ................................................. 80 9BF 80BFile Numbering .................................... 81 81BLCD Brightness ................................... 82 82BInstant Review ..................................... 83 82BMemory................................................ 84 83BStart-up LOGO..................................... 85 6 C and TV Connection......................
Preface About this Manual This manual is designed to assist you in using your new digital camcorder. All information presented is as accurate as possible but is subject to change without notice. For the latest revision, please visit www.hp.com/support. Copyright This manual contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
Warning: A shielded type power cord is required in order to meet FCC emission limits and to prevent interference to radio and television reception. Use only shielded cable to connect I/O devices to this equipment. Any changes or modifications not expressly approved by the manufacturer may void your warranty and service agreement. Declaration of Conformity This device complies with Part 15 of the FCC rules.
Do not use or store the product in dusty, dirty, or sandy areas or any area that is close to an air conditioner or heater. It is normal that the temperature of the Digital Camcorder body rises if the Digital Camcorder is on for a long period of time. Do not open the battery cover while the Digital Camcorder is recording. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored.
Battery Safety Notice If the battery pack is mishandled, the battery pack can burst, cause a fire or chemical burns. Observe the following cautions. Do not disassemble. Do not crush or expose the battery to any shock or excessive force such as hammering or dropping. Do not short circuit and do not allow metal objects to come into contact with the battery terminals. Do not expose to direct sunlight or to temperatures above 45*C (113*F). Do not incinerate or dispose of in a fire.
Photography Terms and Definitions Terms Auto Focus (AF) White Balance Auto White Balance (AWB) Digital Print Order Format (DPOF) Exif/JPEG JPEG Definitions Auto focus refers to a camcorder lens’ ability to adjust its configuration in order to focus properly on a subject regardless of whether it is near or far from the camcorder. Auto focus lenses generally provide vastly superior image quality than do their fixed focus cousins since they do not have to rely on their depth of field.
Terms Exposure Value ISO Speed USB Definitions A numerical value that is inversely proportional to the exposure provided to an image sensor to obtain an image. Images obtained from a camcorder using a range of exposure index values will normally provide a range of image quality levels. A numerical value calculated from the exposure provided at the focal plane of an electronic c camcorder to produce specified camcorder output signal characteristics using the methods described in the referenced standard.
1 Introduction 0B 1.1 Accessories 1B This package should contain the following items.
1.
1.3 Adjusting LCD Display BB1313 13BB13 To begin capturing photos and videos, open the LCD display panel as illustrated below.
2 Getting Started 1B 2.1 Inserting SD Card 14B 1. Open the Insert an SD card and make sure facing the touching face downward. Note: Please be careful to insert the SD card(s) as illustrated above so that damage to the SD card(s) and camcorder does not occur. To avoid damaging photos and video files, do not remove or insert the SD card while the camcorder is powered on.
2.2 Charging the Battery It is recommended that the NP-40 Lithium Battery be fully charged before use. First, connect the external battery charger to the AC power source (wall outlet or power strip). Next, plug the battery into the external charger as illustrated below. The battery may take up to 2 1/2 hours to charge. When the light on the charger turns green, remove the battery and use when ready. Note: Do not leave the battery in the charger for extended periods of time after it has been fully charged.
2.3 Loading the Battery 15B Please use only the battery provided or recommended by the manufacturer or dealer. Note: Incorrectly inserting the batteries could result in non-repairable damage. 1. Open battery cover.
2. Insert the battery according to the illustration. The electrode is inside of the camcorder. * DO NOT use NiMH AA batteries. 3. Close the battery cover.
2.4 Using the Touch Screen 17B 2.4.1 Single Touch 40B Single touch to activate hotkeys on LCD screen. Example, in Video/ Still Mode: 1. Touch the 2. Touch the zoom out. 3. Touch the mode. 2.4.2 icon to enter the Setup menu. icon to zoom in and touch the icon to icon to set the camcorder in playback Slide 41B While in Playback mode, touch and slide right or left to view the previous or next Video/Photo.
2.4.3 Rotate 42B While in Playback mode, touch the photo and slide in a half circle motion (as illustrated below) to rotate 90 with each motion.
2.5 Buttons & Functions 18B Description Button Function Press the power button to turn the Digital Camcorder ON/OFF. Opening and closing the LCD panel will also power ON/OFF as well. Power button Press the button to display the main menu. Menu button There are three operating modes for the Digital Camcorder: Video mode, Photo mode, and Audio mode. Press the Mode switch to cycle through the different modes.
Description Button Function This Digital Camcorder has 4X Digital zoom (in Video mode of HD1080p resolution only has 2X digital zoom). Zoom toggle Move the Zoom toggle to the right ( ) to zoom in, or move to the left ( ) to zoom out. Shutter button Press the button to capture a photo. Recording button Press the button to record a video in Video mode and activate audio recording in Audio mode. Playback button Press the Playback button to enter Playback mode and playback the last file recorded.
2.6 About LED Indicators 19B The table below describes the different modes of the camcorder LED indicator and Self-timer indicator. Indicator Color Definition Green The power is on Red blinking The flash is charging Recording Red blinking Recording Self-timer Red blinking Start of Self-timer Indicator LED Indicator Self-timer Indicator Power 2.7 Initial Settings Before Use 20B 2.7.1 1.
2. Touch the desired field on the LCD panel or press LEFT/RIGHT on the 4-Way Direction button to navigate through the date and time field. 3. Touch the up/down icons on the LCD panel or press the 4-Way Direction Button Up/Down to adjust the value. Press the Set button or touch the Return icon ( ) to store the value you have changed.
3 LCD Display Information 2B 3.1 Video Mode 21B The following table describes all the icons that are displayed when the Digital Camcorder is in Video mode ( ). 1 Video mode 2 Motion Detection mode 3 Night mode indicator 4 1.
7 INT Memory Status indicator : SD card 1 indicator : SD card 2 indicator INT : Internal memory indicator (displayed when there is no SD card in camcorder) 8 Backlight indicator 9 Macro Focus indicator 10 White Balance indicator Battery status indicator 11 12 00:00:00 Remaining recording time indicator 13 Histogram indicator 14 Enter Playback mode touch icon 15 Zoom ratio bar indicator 16 Enter Menu touch icon 17 Assist LED light button (On, Off) 18 Resolution indicator 19 Burst mod
3.2 Photo Mode The following table describes all the icons that are displayed when the Digital Camcorder is in Photo mode ( ). 1 Photo mode indicator 2 Night mode indicator 3 1.
7 Backlight indicator 8 Macro Focus indicator 9 White Balance indicator 10 Battery status indicator 11 0000 Shots remaining, indicates the remaining shots available.
3.3 Audio Mode 2B The following table describes all the icons that are shown when the Digital Camcorder is in Audio mode ( ).
4 Using the Camcorder 3B 4.1 Video Recording 24B 1. By default, this camcorder will power up to Video mode ( ). If the camcorder is not in Video mode, press the until this mode is selected. button to start or stop video recording. 2. Press the 3. The Digital Camcorder will store the movie clip automatically on the SD card when the recording stopped.
4. The displayed LCD screen ratio varies depending on the setting of the movie clip resolution. Please refer to the table shown below: Video Recorded Resolution Preview 16:9 ratio HD1080p (1440 x 1080) HD (1280 x 720) WVGA (848 x 480) 4:3 ratio QVGA (320 x 240) Note: If 2 SD cards are inserted into the camcorder and if recording capacity fills the first SD card, use the configuration menu to select the 2nd SD card (if inserted) for additional storage.
Video Live View Frame Capturing BB2525 25BB25 There is a convenient design for the user to press the Shutter button at Video mode to capture the Video Live View (unable for HD 1080p resolution) or Playback frame as photo. In Video mode, you can directly press the Shutter button at anytime either at Live View or in recording or in video clip playback to capture the video frame to save as a Still image.
4.2 Shooting / Playback Photos 4.2.1 Taking a Picture 4B 1. Power up the camcorder and press the select Photo mode . 2. Press the Shutter button to capture a photo.
4.2.2 1. Photo Playback 45B In the Photo Mode, press Playback button or the Playback touch icon on screen to enter Photo Playback mode, the screen displays the thumbnail images in storage. Playback Enter Playback touch icon 2. Use the 4-Way Direction Button to navigate the stored photos. Press the Set Button or touch the thumbnail image selected for single view on LCD display.
3. Touch the magnification or minification icon ( or ) to magnify or minify the image. When the image is magnified, touch the up/down or left/right icons to move the image. 4. Press the Return icon ( ) on screen or the Shutter button to return to whole picture view screen after the picture has been magnified.
4.3 Audio Recording 26B 1. Power up the camcorder and press the Audio Mode 2. Press the until the is selected. button to start or stop audio recording.
4.4 Video / Audio Clip Playback 27B 1. In the Video/Audio mode, press the Playback button or the Playback touch icon on screen to enter Video/Audio Playback mode, the screen displays stored Video/Audio files.
2. Touch the Left or right arrows at the bottom of the LCD screen or use the 4-Way Direction buttons to browse the stored files 3. To play/pause the playback, press the Recording button ). or touch the screen icon ( / 4. Press the Return icon ( ) to return previous screen, in Playback thumbnail view mode to press Playback button or Return icon on screen can return to Video/Audio mode.
5. Adjust the playback the playback speed of the Video by S touching the screen icon ( ).
5 LCD Display Information 4B 5.1 Video Playback Mode 29B Please refer to the following table regarding the description of each icon and symbol in video playback.
7 Sound volume touch icons 8 Return touch icon 9 Fast forward Playback touch icon 10 / Playback/Pause touch icon 11 Fast Rewind Playback touch icon 12 Enter Menu touch icon 13 Resolution indicator 14 S Slow Motion Playback touch icon 40
5.2 Photo Playback Mode 30B1 Please refer to the following table for descriptions of the icons and symbols in photo playback.
8 Return touch icon 9 Magnification indicator touch icon 10 Minification indicator touch icon 11 Enter Menu touch icon 12 Resolution indicator 5.3 Audio Playback Mode Please refer to the following table regarding the description of each icon and symbol in audio playback.
4 INT 5 000-0000 6 00:00:00/00:00:00 Memory Status indicator : SD card 1 indicator : SD card 2 indicator INT : Internal memory indicator (displayed when there is no SD card in camcorder) Folder and file number Playback progress length / file total length 7 Return touch icon 8 Fast forward Playback touch icon 9 / Playback/Pause touch icon 10 Fast Rewind Playback touch icon 11 Enter Menu touch icon 12 Sound (Volume adjustment) touch icon 43
6 Menu Options 5B Enter the menu options by pressing the button or the Menu icon on screen in Live View mode. When the menu appears on the LCD display, use the 4-Way Direction button to navigate the menu items. (or to touch the up/down icons on the LCD panel to jump to the next page of the menu items) Use the button or touch the icon on the screen to select a menu item. Return to previous screen from options menu by pressing button or the Return icon on screen. 6.1 Menu Options in Video Mode 32B 6.1.
ICON HD Option Video Recorded Resolution HD1080p 1440 x 1080 HD 1280 x 720 WVGA 848 x 480 QVGA 320 x 240 Notes: 1. When setting to HD1080p, HD or WVGA resolution, the LCD display aspect ratio is 16:9. 2. When setting to QVGA video resolution, the LCD display aspect ratio is 4:3. 6.1.2 White Balance 47B 1. Turn on the Digital Camcorder and make sure it is in the Video mode. 2. Press the button and move the 4-Way Direction Button to highlight White Balance.
A 6.1.3 Auto The Digital Camcorder automatically adjusts the white balance. Daylight The setting is suitable for outdoor recording in daylight. Cloudy The setting is suitable for recording in cloudy or shady environments. Fluorescent The setting is suitable for indoor with fluorescent lamp lighting, or environments with high color temperature. Tungsten The setting is suitable for indoor with incandescent lamp light, or environments with low color temperature. 48B Apply Artistic Effects 1.
Normal Make recordings in nature color B&W Make recordings in B&W (Black and White) color Sepia Make recordings in Sepia-toned color 6.1.4 Metering 49B 1. Turn on the Digital Camcorder and make sure it is in the Video mode. 2. Press the button and move the 4-Way Direction button or Button to highlight Metering. Press the touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select Spot, Center or Touch AE.
Spot This setting is to ensure correct exposure for the object even if the background is very bright or very dark. Center Use this setting to preserve background details while letting lighting conditions at the center of the frame define exposure. Touch AE Touch the target object on screen for auto metering the exposure value.
6.1.5 Backlight 50B 1. Turn on the Digital Camcorder and make sure it is in the Video mode. 2. Press the button and move the 4-Way Direction Button to highlight Backlight. Press the button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select On or Off. button or touch the icon on the screen to Press the select the item. 6.1.6 Night Mode 51B 1. Turn on the Digital Camcorder and make sure it is in the Video mode. 2.
6.1.7 Motion Detection 52B When Motion Detection is turned on, the camcorder will detect the motion for Video recording without human intervention. When the AE variation is detected, the recording will start immediately. 1. Turn on the Digital Camcorder and make sure it is in the Video mode. 2. Press the button and move the 4-Way Direction Button to highlight Motion Detection. Press the button or touch the icon on the screen to display the submenu. 3.
6.1.8 Burst 1. Turn on the Digital Camcorder and make sure it is in the Video mode. 2. Press the button and press the 4-Way Direction Button to highlight Burst. Press the button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select On or Off. Press the item. 6.1.9 button or touch the icon on the screen to select EV Compensation 53B You can adjust the value of the exposure compensation which is ranged from -2.0EV to +2.0EV (at 0.5EV increment).
1. Turn on the Digital Camcorder and make sure it is in the Video mode. 2. Press the button and move the 4-Way Direction Button to highlight the EV Compensation item. Press the button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to adjust the Exposure button or touch the value (-2.0 ~ + 2.0). Press the icon on the screen to select the item.
6.2 Menu Options in Video Playback Mode 3B When in Video Playback thumbnail or single view mode, switch to the video file you would like to set, press the Menu touch icon on LCD display to show the Video Playback options menu; Or in Video Playback single view mode of the selected video file, press the button to show the Video Playback options menu. 6.2.1 Delete 5B 1. Enter Video Playback options menu, use the 4-Way Direction Button to highlight Delete. 2.
4. Press the 4-Way Direction Button to select “O” Yes or “X” NO. Press the button or touch the icon on the screen to delete the item. Delete One Delete the current file Delete All Delete all files stored in the Digital Camcorder Note: The file cannot be recovered once it is deleted. Therefore, please make sure you have backed up the file before deleting. Protected files cannot be deleted. Before deleting, you must unlock the file. 6.2.2 Protect 56B 1.
Protect Lock Note: To unlock the file from Protect, repeat steps stated above. When files are not protected, the key icon is not displayed.
6.2.3 Date Ranking 56B 1. Enter Video Playback options menu, use the 4-Way Direction Button to highlight Date Ranking. 2. Press the submenu. 3. Use the 4-Way Direction Button to select "Off" or "On". button or touch the on screen to display the Press the button or touch the icon on the screen to select the item.
6.3 Menu Options in Photo Mode 34B When in Photo Mode, press the camcorder mode option Menu. 6.3.1 button to display the Photo Resolution BB5757 57BB57 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2. Press the button and use the 4-Way Direction Button to highlight Resolution. Press the button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select 12M, 8M, 5M button or touch the icon on the or 3M.
6.3.2 White Balance 58B 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2. Press the button and use the 4-Way Direction Button to highlight White Balance. Press the button or touch the icon on the screen to display the submenu. 3. Use the 4-Way Direction Button to select Auto, Daylight, Cloudy, Fluorescent or Tungsten. Press the touch the icon on the screen to select the item. A button or Auto The Digital Camcorder automatically adjusts white balance.
6.3.3 59B Apply Artistic Effects This Digital Camcorder can take standard color images, Black and White images, or Sepia color tone images. 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2. Press the button and use the 4-Way Direction Button to highlight Apply Artistic Effects. Press the button or touch the icon on the screen to display the submenu. 3. Use the 4-Way Direction Button to select Normal, B/W or Sepia.
6.3.4 Metering 60B 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2. Press the button and use the 4-Way Direction Button to highlight Metering. Press the button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select Spot, Center or button or touch the icon on the Touch AE. Press the screen to select the item. 6.3.5 Backlight 61B 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2.
61
6.3.6 Night Mode 62B 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2. Press the button and use the 4-Way Direction Button to highlight Night Mode. Press the button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select On or Off. button or touch the icon on the screen to Press the select the item. 6.3.7 Self-Timer 63B 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2.
With 2 sec. Self-Timer: The photo will be taken 2 seconds after the shutter is released. With 10 sec. Self-Timer: The photo will be taken 10 seconds after the shutter is released.
6.3.8 Burst 64B You can continuously shoot three pictures with this function, started by released the Shutter Button pressed deeply and ended automatically after three pictures are taken. 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2. Press the button and use the 4-Way Direction Button to highlight Burst. Press the button or touch the icon on the screen to display the submenu. 3. Press the 4-Way Direction Button to select OFF or ON.
6.3.9 EV compensation 65B You can adjust the image exposure value by the Exposure Compensation function which is ranged from -2.0EV to +2.0EV (at 0.5EV increment). The higher the EV value, the brighter the image will be. 1. Turn on the Digital Camcorder and make sure it is in the Photo mode. 2. Press the button and use the 4-Way Direction Button to highlight EV Compression. Press the button or touch the icon on the screen to display the submenu. 3.
6.4 Menu Options in Photo Playback Mode 35B When the camcorder is in Photo Playback thumbnail or single view mode, switch to the Photo Playback image you would like to set, press the Menu touch icon on LCD display to show the Photo Playback options menu; Or in Photo Playback single view mode of the selected image, press the Playback options menu. 6.4.1 button to show the Photo Delete 6B 1. Enter Photo Playback options menu, use the 4-Way Direction button to highlight Delete. 2.
4. Press the 4-Way Direction Button or touch the screen to select “O” YES or “X” No and press the delete file(s). button to Note: The files cannot be recovered once deleted. Therefore, please make sure you have a backup the file before deleting. Protected files will not be able to be deleted. Before deleting a protected file, you must unlock the file.
6.4.2 Protect 67B 1. Enter Photo Playback options menu. 2. Use the 4-Way Direction Button to highlight Protect. 3. Press the button or touch the Protect icon on screen to display the submenu. 4. Press the 4-Way Direction Button or touch the screen to select item. Press the confirm. The key icon file is Protected. button or touch the screen to will be displayed to indicate the Protect Lock Note: Repeat above steps to unlock the file. When the file is unlocked, the key icon will disappear.
BB6868 68BB68 6.4.3 Date Ranking 1. Enter Photo Playback options menu, use the 4-Way Direction Button to highlight Date Ranking option. 2. Press the submenu. 3. Use the 4-Way Direction Button to select "Off" or "On". button or touch the on screen to display the button or touch the icon on the screen to Press the select the item.
6.4.4 Autoplay This Digital Camcorder includes a slide show function that can playback each picture at a regular interval. 1. Enter Photo Playback options menu, use the 4-Way Direction button to highlight Autoplay. 2. Press the button or touch the Autoplay icon on screen to display the submenu. 3. Press the 4-Way Direction Button or touch the screen to select “Off”, 1 second, or “3 secs.”. The images will be displayed automatically.
6.4.5 Rotate 69B 1. Enter Photo Playback options menu, use the 4-Way Direction button to highlight Rotate. 2. Press the button or touch the Rotate icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select the Left 90 or Right 90, then press the on screen to rotate image.
6.4.6 DPOF 70B Use the DPOF (Digital Print Order Format) function to indicate the printing information stored in the memory card. 1. Enter Photo Playback options menu, use the 4-Way Direction button to highlight DPOF. 2. Press the button or touch DPOF icon on screen to display the submenu. 3. Use the 4-Way Direction Button and press the button or touch the options on screen to select the item. The DPOF icon S will be shown to indicate the files that are ordered for printing. DPOF Note: 1.
6.5 Setup Menu 36B The Setup Menu can be used for the Digital Camcorder system settings. You can enter Setup menu by pressing button or the Menu touch icon on screen at Photo or Video or Audio mode then switch to Setup menu options. 6.5.1 Information 71B This function can be used to display information, histogram or no information on LCD screen. 1. Enter Setup menu, use the 4-Way Direction Button to highlight Information. 2.
6.5.2 Date & Time 72B Please refer to 2.7 for the Setting of Date and time. 6.5.3 Sound 73B 1. Enter Setup menu, use the 4-Way Direction Button to highlight Sound. 2. Press the button selection Button or touch the Sound icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select Off, Low, Medium or High. Press the button or touch the selected option icon on screen to set.
6.5.4 Default 74B Use this function to reset all settings to the default setting. 1. Enter Setup menu, use the 4-Way Direction Button to highlight Default. 2. Press the button or touch the Default icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select "O" YES or "X" NO. Press button or touch the selected option icon on screen to select the item.
6.5.5 TV standard 75B Use the TV standard to set the TV system for your area. 1. Enter Setup menu, use the 4-Way Direction Button to highlight TV standard. 2. Press the button or touch the TV standard icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select NTSC or PAL. Press the button or touch the selected option icon on screen to set.
6.5.6 76B Auto Power Off This function can be used to turn off the Digital Camcorder automatically after a period of time. 1. Enter Setup menu, use the 4-Way Direction Button to highlight Auto Power Off. 2. Press the button or touch the Auto Power Off icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select Off, 3 mins, or 5 mins. Press the button or touch the selected option icon on screen to set.
6.5.7 Frequency 7B Use the Frequency option to set the frequency system for your area. 1. Enter Setup menu, use the 4-Way Direction Button to highlight Frequency. 2. Press the button or touch the Frequency icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select 50 Hz or 60 Hz. Press the button or touch the selected option icon on screen to set.
6.5.8 Language 78B 1. Enter Setup menu, use the 4-Way Direction Button up and down to highlight Language. 2. Press the select. 3. Use the 4-Way Direction Button to select the following languages: English, German, French, Italian, Japanese, Spanish, Portuguese, Simplified Chinese, Traditional Chinese, Turkish, Russian, Thai, or Arabian. Press the button to confirm or touch the screen to button or touch the selected language icon on screen to set.
6.5.9 Format 79B This function allows you to format the memory card or the built-in memory. 1. Enter Setup menu, use the 4-Way Direction Button to highlight the Format. 2. Press the button or touch the Format icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select "O" Yes or "X" NO. Press the button or touch the selected option icon on screen to set. Warning: All the data stored in the memory card or flash memory will be deleted after formatting.
6.5.10 File Numbering 80B This setting allows you to control the numbering of the files that are stored on the memory card. If “Series” is selected, the file name will be numbered sequentially. If “Reset” is selected, the next file name will start from 0001 even after formatting, deleting or inserting a new memory card. 1. Enter Setup menu, use the 4-Way Direction Button to highlight File Number. 2. Press the button or touch the File Number icon on screen to display the submenu. 3.
6.5.11 LCD Brightness 81B This function can be used to adjust the brightness of the screen. 1. Enter Setup menu, use the 4-Way Direction Button to highlight LCD brightness. 2. Press the button or touch the LCD brightness icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select High, Medium, or Low. Press the button n or touch the selected option icon on screen to set.
6.5.12 Instant Review 82B This function can be used to instantly browse the files after taking a picture. 1. Enter Setup menu, use the 4-Way Direction Button to highlight Instant Review. 2. Press the button or touch the Instant Review icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select 1 second, 3 secs., or 5 secs.. Press the button or touch the selected option icon on screen to set.
6.5.13 Memory 82B Use this function to select data storage location. 1. 2. Enter Setup menu, use the 4-Way Direction Button to SET Mode. Press 4-Way Direction Button to highlight Memory item. Press button to display submenu; or Touch the screen to select the item. 3. Press 4-Way Direction Button to select Internal, SD1, or SD2. Press " " button to confirm; or touch the screen to select the item. Note: The photos or videos can be stored in a built-in flash memory or external SD cards.
6.5.14 Start-up LOGO 83B Use this function to show the Star-up image on LCD when the digital camcorder is turned on. 1. Enter Setup menu, use the 4-Way Direction Button to highlight the Star-up Logo. 2. Press the button or touch the Star-up Logo icon on screen to display the submenu. 3. Use the 4-Way Direction Button to select Default or User Setting. Press the button or touch the selected option icon on screen to set.
7 PC and TV Connection 6B 7.1 Connecting to the Computer 37B As shown in the illustration, use the USB cable provided to connect the Digital Camcorder to a PC for file transfer. Connect the HP V5061u Digital Camcorder PC/notebook by using the USB cable provided with the product. if a second SD card is inserted in SD slot 2) new drive letters should appear in Windows Explorer. These new drive letters represent the V5061u's internal memory and memory card slot.
7.2 Connecting to a Standard TV 38B As shown in the illustration, use the video cable to connect the Digital Camcorder to a standard TV.
7.3 Connecting to a HD TV 39B As shown in the illustration, use the HDMI cable provided to connect the Digital Camcorder to an HD TV for high resolution picture display.
8 Installing the Software 7B 1. Place the CD ROM into the CD/DVD drive on your PC. 2. If the installation does not start, please open Windows Explorer and select the CD/DVD drive on your PC. Then double click on the Install_CD.exe to start the software installation. The following screen will be displayed. 3. Click on the “Arcsoft TotalMedia Extreme” and follow the instructions on-screen. 4. The Serial number of Arcsoft Total Media Extreme is on CD package cover.
9 Editing Software 8B ArcSoft Total Media Extreme(TME)™ provides a way to manage your media files for you, and provides the ability to create and share projects featuring your photo, video, and music files. You can Create your own videos or photo slide shows complete with a soundtrack. Upload your files easily to You Tube™! Share your files through simple email attachments or popular photo printing applications. Go to http://www.arcsoft.com/ for more information.
10 Appendix 9B Troubleshooting Problem Can not turn on the Digital Camcorder. Camcorder shuts down suddenly. Pictures are not stored in the memory. Images are out of focus Possible Cause Solution 1. Battery is not inserted correctly. 2. Battery exhausted. 1. Please insert battery correctly. 2. Replace the battery. 3. Charge the battery. 1. Auto Power Off is enabled. 2. Battery cloud. 3. Battery exhausted. 1. Please turn on the power again. 2. Replace the battery. 3. Charge the battery.
Problem Unable to use the external memory card. Camcorder buttons do not function Possible Cause Solution 1. Memory card is writing Protected. 2. Memory card contains images taken by other camcorders. 1. Unlock the memory card. 2. Reformat the memory card. Please make sure to backup the files before reformatting memory card. Camcorder needs to be reset. Take out battery into the camcorder and re-insert.
11 Getting Help 10B Should you have a technical support question or your HP Digital Camcorder requires service within the warranty period, please contact the original point of purchase or an authorized HP reseller in your country. If service is not available at those locations, please contact an HP Branded Product warranty agent from the support contact list provided below.
Contact/phone Support: Language Contact/phone Support simp.chinese@hpodd.com Chinese trad.chinese@hpodd.com Deutsch deutsch@hpodd.com Dutch hollands@hpodd.com English english@hpodd.com Espanol espanol@hpodd.com Français francais@hpodd.com Italiano italiano@hpodd.com Japanese nippon@hpodd.com Korean korean@hpodd.com Portuguese portugues@hpodd.com Svensk svensk@hpodd.
Contact/phone Support: Country Language Number Europe Region (EMEA) België Dutch and German + 32 2700 1724 Français French + 33 171230454 Deutschland German + 49 6950073896 Ireland English + 353 1850882016 Italia Italian + 39 269682189 Netherlands Dutch + 31 202015093 Espana Spanish + 34 914533458 Switzerland German/French/Italian + 41 18009686 UK English + 44 2073652400 North America United States English 1.866.694.7633 Canada English and French 1.866.694.
Perú 51.1.705.6232 Venezuela 58.212.335.
Specification Image Sensor Type Total Pixels Effective Pixels Movie Recorded Resolution Image Resolution File Format Lens Specification Digital Zoom Focus Range LCD Monitor Size LCD Monitor Resolution Storage Media Internal Memory White Balance Scene Mode Battery Type Approx. Dimensions Approx. Weight Interface Supplied Software CMOS 5.51 million (2752 (H) × 2004 (V)) 5.
P/N: 7525C00147A
