Software Manual

Figure 72 Move Media screen
The Move Media screen is divided into two sections showing all available source and destination
drives, slots, and mailslots. To move media from one location to another, selected the desired
source and destination locations and click Perform Move.
NOTE: Only one item can be moved at a time, so it is not possible to select multiple source or
destination locations. The Perform Move button is grayed out until a valid source and destination
have been selected.
With the CSI version of L&TT, from the device information screen for a supported library or
autoloader, use the movemedia command to access the Move Media screen. This screen is identical
to the Cartridge Inventory screen accessed with the inventory command with the exception of
the screen name shown in the top line. Use the standard keyboard commands (Ctrl+U, Ctrl+D) to
scroll through the list. To perform the move, use the move command.
move <source> <destination>
The values used for <source> and <destination> are a combination of the letter s for slot, d for
drive, or m for mailslot, and the number of the device. For example, to move media from Slot 4 to
Slot 3, enter the following command:
move s4 s3
To move media from Drive 1 to Mailslot 3, enter the following command:
move d1 m3
Possible Move Media error situations
The following errors may be encountered when attempting to move media through L&TT:
NOTE: These errors are less common with the Windows version of L&TT because the user interface
reduces the number of possible error situations.
168 Additional functionality