Software Owner's manual

Flex Copy XP user guide 17
• Volume 3: Volume 3 must be offline. Volume 3 must not be an S-VOL for Business Copy XP.
Volume 3 must not be set to reject access using LUN Security XP Extension.
Figure 5 Configuration pattern example 1: starting copy operations
• Configuration pattern example 2
In the type of configurations shown in Figure 6, note the following for each volume:
• Volume 1: Volume 1 must be offline. Volume 1 must not be a P-VOL or S-VOL for Business Copy XP.
For Volume 1, the S-VOL Disable mode must not be set using LUN Security XP Extension.
• Volume 2: Volume 2 must be offline.
• Volume 3: Volume 3 must be offline. Volume 3 must not be set to reject access using LUN Security
XP Extension.
Figure 6 Configuration pattern example 2: starting copy operations
• Configuration pattern example 3
In the type of configurations shown in Figure 7, note the following for each volume:
• Volume 1: Volume 1 must be offline. Volume 1 must not be a P-VOL or S-VOL for Business Copy XP.
• Volume 2: Volume 2 must be offline. For Volume 2, the S-VOL Disable mode must not be set using
LUN Security XP Extension.
• Volume 3: Volume 3 must be offline. Volume 3 must not be set to reject access using LUN Security
XP Extension.
• Business Copy XP pair consists of Volume 3 and Volume 4: The pair status must not be RCPY (copy
processing from the S-VOL to the P-VOL must not be in progress).
Figure 7 Configuration pattern example 3: starting copy operations
• Configuration pattern example 4