Software User Manual

58 Performance Control Export Tool
Storing periods output by the show subcommand is the same as the information displayed in the
Monitoring Term area of the Auto LUN XP pane (see Figure 26).
Figure 26 Information output by the show subcommand
The login command must execute before the show subcommand executes.
The group subcommand
Syntax
groupΔ{PhyPGD[Short|Long]Δ[[parity-group-id]:[parity-group-id]][Δ...]|
PhyLDEVΔ[Short|Long]Δ[[parity-group-id]:[parity-group-id]][Δ...] |
PhyExGΔ[[exg-id]:[exg-id]][Δ...]|
PhyExLDEVΔ[[exg-id]:[exg-id]][Δ...]|
PhyProcΔ[Short|Long]|
PhyCSWΔ[Short|Long]|
PGΔ[[parity-group-id|V-VOL-group-id|exg-id]:
[[parity-group-id|V-VOL-group-id|exg-id]][Δ...]|
LDEVΔ[[parity-group-id|V-VOL-group-id|exg-id]
[[parity-group-id|
V-VOL-group-id|exg-id]][Δ...]|
PortΔ[[port-name]:[port-name]][Δ...]|
PortWWNΔ[[port-name]:[port-name]][Δ...]|
LUΔ[[port-name.host-group-id]:[port-name.host-group-id]][Δ...]|
PPCGΔ[[SPM-group-name]:[SPM-group-name]][Δ...]|
PPCGWWNΔ[[SPM-group-name]:[SPM-group-name]][Δ...]|
RemoteCopy Δ|
RCLU Δ[[port-name.host-group-id]:[port-name.host-group-id]][Δ...]|
RCLDEV Δ[[CU-id]:[CU-id]][Δ...]|
RCCLPR Δ|
UniversalReplicatorΔ|
URJNL Δ[[JNL-group-id]:[JNL-group-id]][Δ...]|
URLU Δ[[
port-name.host-group-id]:[port-name.host-group-id]][Δ...]|
URLDEV Δ[[CU-id]:[CU-id]][Δ...]
}
Description
The group subcommand specifies the type of monitoring data that you want to export. This command uses
an operand (such as PhyPG and PhyLDEV above) to specify a type of monitoring data.