Operation Manual
2. Slide the paper-width guide to the left.
3. Insert one or more envelopes into the far-right side of the input tray and slide the stack of envelopes
down until it stops.
The side to be printed on should face up. For envelope with ap on the long edge, insert the envelope
vertically with the ap on the left side and facing down. For envelope with the ap on the short edge,
insert the envelope vertically with the ap on the top and facing down.
4. Slide the paper-width guide to the right against the stack of envelopes until it stops.
5. Pull out the output tray and the tray extender.
ENWW Load media 21