Operation Manual

1 Print-carriage access door
2 Print cartridge storage area of the HP All-in-One
3. Close the print-carriage access door.
To remove the print cartridge from the print cartridge protector
Press down and back on the top of the print cartridge protector to release the
print cartridge, then slide the print cartridge out of the print cartridge protector.
Align the print cartridges
The HP All-in-One prompts you to align cartridges every time you install or replace a
print cartridge. You can also align the print cartridges at any time from the control
panel or by using the HP Image Zone software on your computer. Aligning the print
cartridges ensures high-quality output.
Note If you remove and reinstall the same print cartridge, the HP All-in-One
will not prompt you to align the print cartridges. The HP All-in-One remembers
the alignment values for that print cartridge, so you do not need to realign the
print cartridges.
To align the print cartridges from the control panel when prompted
1. Make sure you have letter or A4 unused plain white paper loaded in the paper
tray, and then press OK.
The HP All-in-One prints a print cartridge alignment sheet and aligns the print
cartridges. Recycle or discard the page.
User Guide 83
Maintain your HP All-in-One