Operation Manual

reference guide
load originals and load paper
11
load envelopes
Use the print feature of your software to print to envelopes with your HP PSC.
Do not use shiny or embossed envelopes, or envelopes that have clasps or
windows. You can load the paper tray with one or multiple envelopes.
1 Remove all paper from the paper tray.
2 Slide an envelope into the tray, with the envelope flap up and to the left
(print-side down), until it stops.
3 Adjust the paper-width guide against the envelope.
Be careful not to bend the envelope.
If you are loading multiple envelopes, make sure the envelopes fit within
the tray (do not overload it).
Consult the help files in your word processing software for details on how
to format text for printing on envelopes.
load postcards, hagaki cards, or 4-by-6 inch photo paper
Following is the procedure for loading postcards, hagaki cards, or 4-by-6 inch
photo paper.
1 Remove all paper from the paper tray, and then slide a stack of cards or
4-by-6 inch photo paper into the tray until it stops.
Make sure the print-side faces down.
Note: If you are using photo paper with perforated tabs, load the photo
paper so that the tabs are closest to you.
2 Adjust the paper-width guide against the cards or photo paper until it
stops.
Make sure the cards or photo paper fit within the tray (do not overload it).