- HP Printer User Manual

Upper Cassette Mount Removal
7-42 Removal/Replacement Procedures
10 Remove the upper paper size sensor. (See page 7-40.)
11 Remove the cassette release cover (two screws).
12 Remove the plastic guide on the vertical edge of the printer. Depress the tabs visible
through the cassette housing. Gently turn it and lift from the printer.
13 For the tray releases:
• Carefully release the tension spring cable from the pick pressure adjustment lever
(only on the most recent versions of the printer).
• Remove the spring and cable.
• Remove the upper and lower levers (one spring and C-clip each).
• Remove the upper and lower cams (one screw each).
• Remove the upper and lower latches (one spring and C-clip each).