- HP Printer User Manual

Disk Drive Housing Removal

Removal/Replacement Procedures 7-25

Disk Drive Housing Removal

To remove the disk drive housing:

1 Open the front and back covers.

2 Remove the diskette(s).

3 Disconnect CN77 and CN79.

4 For the hard drive option, disconnect the drive’s data cable.

5 Loosen the thumbscrew on the back of the disk drive housing.

6 Remove the disk drive housing from the front of the printer. Be careful not to damage

the cables on the sharp edges of the chassis.

Replacement Note:

For A drives, set the jumper on the drive circuit board to 0; for B drives, set the jumper to

CN79

Back Detail

Thumbscrew

CN77

Hard Disk Drive

Connector