- Hewlett-Packard PhotoSmart User Guide

Note If you connect a non-HP camera and encounter
problems while printing, see the documentation that
came with your camera. HP is not able to provide
technical support for non-HP cameras.
To print using a PictBridge-certified camera
1. Turn on your PictBridge digital camera. Make sure
the USB configuration is set to Digital Camera, so
that your camera is able to successfully connect to
the printer and print photos.
2. Load photo paper into the printer.
The printer automatically prints using the best
quality settings for HP Advanced Photo Paper. To
change the paper type or quality settings, print your
photos from a computer. For more information on
printing from a computer, see the electronic Help.
Note If you are printing from an HP Photosmart
E427 digital camera, you can print using Normal
print quality for faster prints. The print quality may be
noticeably lower, especially if you are not using HP
Advanced Photo Paper. Print quality is best when
Best print quality is selected.
3. Connect your camera to the PictBridge port on the
top of the printer using the USB cable for the
camera. The PictBridge light turns solid green
when the connection is established.
4. Use the menu on your camera image display to
select and print photos. The On light and the
PictBridge light flash while the photos are printing.
Important: Your photos are instantly dry, and can be
handled immediately after they are printed. However,
HP recommends that you leave the printed surface of
your photos exposed to the air for 5–10 minutes after
20 HP Photosmart A310 series