Installation Instructions

2 • HP All-in-One
4
5
b ca
fge
h
d
i
Attach the control panel faceplate
(if not attached)
a Lift the lid.
ab c
The control panel faceplate must be attached for the HP All-in-One to work!
Load paper trays
Load plain white paper in the bottom paper tray. Plain paper is needed for alignment.
Load the 4 x 6 in (10 x 15 cm) photo paper with the glossy side down in the photo tray located underneath
the output tray. (If paper is tabbed, make sure the tab is towards you.)
Tip: Pull out, and then fl ip the
paper tray extender to catch
pages.
c Press down fi rmly on all edges of the overlay
to secure it. Make sure all buttons are visible
and not blocked.
b Position the control panel faceplate
over the buttons on the device.
Main tray:
Photo paper tray: