Operation Manual

To set up Scan to Network Folder from the printer software (OS X)
1. Open HP Utility. For more information, see HP Utility (OS X).
2. Click Scan to Network Folder under the Scan Settings section, and then follow the onscreen
instructions.
NOTE: You can customize the scan settings for each destination folder.
To set up Scan to Network Folder from Embedded web server (EWS)
1. Open the embedded web server (EWS). For more information, see Open the embedded web server.
2. On the Home tab, click Network Folder Setup in the Setup box.
3. Click New, and then follow the onscreen instructions.
NOTE: You can customize the scan settings for each destination folder.
4. After you have entered the required information about the network folder, click Save and Test to make
sure the link to the network folder is working correctly. The entry is added to the Network Folder list.
Set up Scan to Email
You can use the printer to scan documents and send them to one or more email addresses as attachments—
without additional scanning software. You do not need to scan les from your computer and attach them to
email messages.
Set the Outgoing Email Proles
Congure the email address that will appear in the FROM portion of the email message sent by the printer.
You can add up to 10 Outgoing Email Proles. You can use the HP software installed on your computer to
create these proles.
Add email addresses to the Email Address Book
Manage the list of people to whom you can send email messages from the printer. You can add up to 15 email
addresses with their corresponding contact names. You can also create email groups. To add email addresses,
you can use the printer’s embedded web server (EWS) or the printer’s control panel.
Congure other email options
You can congure default SUBJECT and body text that is included in all email messages sent from the printer.
To congure these options, you can use the printer’s EWS or the printer’s control panel.
Step 1: Set up the outgoing email proles
To set up the outgoing email prole used by the printer, complete the following steps for your operating
system.
To set up the outgoing email prole from the printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows).
2. Click Print, Scan & Fax , and then click Scan .
3. Click Scan to E-mail Wizard.
4. Click New, and then follow the onscreen instructions.
ENWW HP Digital Solutions 13