Operation Manual
NOTE: You can customize the scan settings for each destination folder.
4. After you have entered the required information about the network folder, click Save and Test to make
sure the link to the network folder is working correctly. The entry is added to the Network Folder list.
Set up Scan to Email
You can use the printer to scan documents and send them to one or more email addresses as attachments—
without additional scanning software. You do not need to scan les from your computer and attach them to
email messages.
Set the Outgoing Email Proles
Congure the email address that will appear in the FROM portion of the email message sent by the printer.
You can add up to 10 Outgoing Email Proles. You can use the HP software installed on your computer to
create these proles.
Add email addresses to the Email Address Book
Manage the list of people to whom you can send email messages from the printer. You can add up to 15 email
addresses with their corresponding contact names. You can also create email groups. To add email addresses,
you can use the printer’s embedded web server (EWS) or the printer’s control panel.
Congure other email options
You can congure default SUBJECT and body text that is included in all email messages sent from the printer.
To congure these options, you can use the printer’s EWS or the printer’s control panel.
Step 1: Set up the outgoing email proles
To set up the outgoing email prole used by the printer, complete the following steps for your operating
system.
To set up the outgoing email prole from the printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows).
2. Click Print, Scan & Fax , and then click Scan .
3. Click Scan to E-mail Wizard.
4. Click New, and then follow the onscreen instructions.
NOTE: After you have set the Outgoing Email Prole, you can use the printer’s embedded web server (EWS)
to add more Outgoing Email Proles, add email addresses to the Email Address Book, and congure other
email options. To open the EWS automatically, select the Launch embedded web server when nished
checkbox on the last screen of the Scan to Email Wizard. When you click Finish, the EWS is displayed in your
computer’s default web browser. For more information about EWS, see Embedded web server.
To set up the outgoing email prole from the printer software (OS X)
1. Open HP Utility. For more information, see HP Utility (OS X).
2. Click Scan to Email under the Scan Settings section.
3. Follow the onscreen instructions.
4. After you have entered the required information about the network folder, click Save and Test to make
sure the link to the network folder is working correctly. The entry is added to the Outgoing Email
Proles list.
ENWW HP Digital Solutions 13