Operation Manual
About cookies
The embedded Web server (EWS) places very small text les (cookies) on your hard drive when you are
browsing. These les let the EWS recognize your computer the next time you visit. For example, if you have
congured the EWS language, a cookie helps remember which language you have selected so that the next
time you access the EWS, the pages are displayed in that language. Some cookies (such as the cookie that
stores customer-specic preferences) are stored on the computer until you clear them manually.
You can congure your browser to accept all cookies, or you can congure it to alert you every time a cookie is
oered, which allows you to decide which cookies to accept or refuse. You can also use your browser to
remove unwanted cookies.
Depending on your printer, if you disable cookies, you also disable one or more of the following features:
● Using some setup wizards
● Remembering the EWS browser language setting
● Personalizing the EWS Home page
For information about how to change your privacy and cookie settings and how to view or delete cookies, see
the documentation available with your Web browser.
Open the embedded web server
You can access the embedded web server through either a network or Wi-Fi Direct.
To open the embedded web server through a network
1. Find out the IP address or hostname of the printer by pressing (the Wireless button) on the printer
control panel or by printing a network conguration page.
NOTE: The printer must be on a network and must have an IP address.
2. In a supported web browser on your computer, type the IP address or hostname assigned to the printer.
For example, if the IP address is 123.123.123.123, type the following address into the web browser:
http://123.123.123.123.
To open the embedded web server through Wi-Fi Direct
1. From the printer control panel, from the Home screen, scroll down to select Wi-Fi Direct, and then press
OK .
2. If the Wi-Fi Direct Settings shows that Wi-Fi Direct is O , you need to turn it on.
To turn on Wi-Fi Direct
a. Press (the Selection button) to select Settings.
b. Select Wi-Fi Direct (selected by default) and then press OK .
c. Select On and then press OK .
ENWW Embedded web server 51