- Hewlett-Packard Printer Service Manual

Chapter 1 General Information

(1) Unlock the bezel.

(2) Pull bezel toward you, then

(3) up and away from the front panel,

releasing the tabs from the slots

at the bottom of the front panel.

Removing the HP NetServer LH 6000 Bezel

CAUTION The NetServer covers are heavy. Support them as you remove them, and allow

room to move them away from the NetServer and for storage when removed.

3. Once you have removed the bezel, remove the left cover by loosening the thumbscrew and

then pulling the cover forward to disengage it. Lift it outward and away from the chassis.

4. Remove the top cover by loosening the thumbscrew, pulling the cover forward and then slightly

sideways to disengage it. Lift it up and away from the chassis.

5. Remove the right cover by loosening the thumbscrew and pulling the cover forward to

disengage it. Lift it outward and away from the chassis.