Operation Manual
3 Computer with modem.
4 Telephone.
To set up the printer on the same phone line as a computer with two phone ports
1. Remove the white plug from the port labeled 2-EXT on the back of the printer.
2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a
telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-
EXT on the back of the printer.
3. Connect a phone to the "OUT" port on the back of your computer dial-up modem.
4. Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack,
then connect the other end to the port labeled 1-LINE on the back of the printer.
NOTE: You might need to connect the phone cord to your country/region adapter.
5. If your modem software is set to receive faxes to your computer automatically, turn o that setting.
NOTE: If you do not turn o the automatic fax reception setting in your modem software, the printer
cannot receive faxes.
6. Turn o the Auto Answer setting.
7. Run a fax test.
You must be available to respond in person to incoming fax calls, or the printer cannot receive faxes.
If you encounter problems setting up the printer with optional equipment, contact your local service provider
or vendor for further assistance.
Serial-type fax setup
For information on setting up the printer for faxing using a serial-type phone system, see the Fax
Conguration website for your country/region.
Austria www.hp.com/at/faxcong
Germany www.hp.com/de/faxcong
Switzerland (French) www.hp.com/ch/fr/faxcong
Switzerland (German) www.hp.com/ch/de/faxcong
United Kingdom www.hp.com/uk/faxcong
Finland www.hp./faxcong
Denmark www.hp.dk/faxcong
Sweden www.hp.se/faxcong
Norway www.hp.no/faxcong
Netherlands www.hp.nl/faxcong
Belgium (Dutch) www.hp.be/nl/faxcong
Belgium (French) www.hp.be/fr/faxcong
Portugal www.hp.pt/faxcong
ENWW Additional fax setup 75