Operation Manual

NOTE: Before you proceed, go through the list at Before you begin on page 54.
1.
From the printer control panel, touch ( Wireless ).
2.
Touch ( Settings ).
3. Touch Wireless Setup Wizard.
4. Follow the display instructions to complete the setup.
Change the connection type
After you have installed the HP printer software and connected the printer to your computer, you can use the
software to change the connection type (for example, from a USB connection to a wireless connection).
To change from a USB connection to a wireless network (Windows)
Before you proceed, go through the list at Before you begin on page 54.
1. Depending on your operating system, do one of the following:
Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer name,
and then click Utilities.
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, select the
printer name, and then click Utilities.
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder of your printer.
2. Click Printer Setup & Software.
3. Select Convert a USB connected printer to wireless. Follow the onscreen instructions.
To change from a USB connection to a wireless network
1. Connect the printer to your wireless network.
2. Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to change the software
connection to wireless for this printer.
Learn more about how to change from a USB to wireless connection. Click here to go online for more
information. At this time, this website might not be available in all languages.
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test report
provides information about the printer status, hardware (MAC) address, and IP address. If the printer is
connected to a network, the test report displays details about the network settings.
To print the wireless test report
1.
From the printer control panel, touch ( Wireless ), and then touch ( Settings ).
2. Touch Print Reports
3. Touch Wireless Test Report.
ENWW Set up the printer for wireless communication 55