User guide

Actions
Start
Starts the SWAN concentrator and its associated CLIPs. When the Start action completes, the
SWAN concentrator and its associated CLIPs are in the Started state.
In a multisystem configuration, this action also causes the current system to take control of the
associated CLIPs. If any of the CLIPs are currently controlled by another system, that system loses
control of those CLIPs.
Stop
Terminates operation of the SWAN concentrator and all associated SWAN CLIPs. When the Stop
action completes, the SWAN CRU and associated SWAN CLIPs are in the Stopped state.
Verify Logical Configuration
Verifies that the SWAN Concentrator CRU is properly configured. If not, an Incorrect Logical
Configuration alarm is generated on the CRU.
SWAN Battery
Attributes
Actions
A subcomponent of the SWAN 2 CRU that provides backup power for 30 seconds in the event of a
power outage.
Location in OSM Tree: System > SWAN Collection > Battery
Example: Battery $ZZWAN.#SWAN2.BAT
Attributes
Battery $ZZWAN
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Logical
Charge Status
The charge status of the SWAN 2 battery.
Values: Charging, Critical (Discharging), Unknown
Device State
The state of the component as known to the operating system on the server. Values